| Model: PPA R38N Specifications |
| Type |
Receiver with display |
| Dimensions |
4.1” x 2.85” x 1.38” (104 x 72 x 35mm) |
| Weight |
4.6oz (130g) with batteries. 2.6oz (73g) without batteries |
| Color |
Black/Silver. Black ABS Plastic case with Aluminum faceplate. |
| Battery Type |
(2) AA Alkaline or (2) AA NiMH Rechargeable |
| Battery Life |
(2) AA non-rechargeable alkaline batteries (BAT 001-2), approx. 50 hrs
(2) AA rechargeable NiMH batteries (BAT 026-2), 1500mAh, approx. 32 hrs |
| Current Consumption |
47mA nominal at 2.4VDC |
| Operating Temp. Range |
32° – 122°F (0° to 50°C) |
| Channels |
17 Wideband, accessed via menu |
| Operating Frequencies |
72.1, 72.2, 72.3, 72.4, 72.5, 72.6, 72.7, 72.8, 72.9, 74.7, 75.3, 75.4, 75.5, 75.6, 75.7, 75.8, 75.9 MHz* |
| FM Deviation |
75 kHz |
| De-Emphasis |
75 µS |
| Display Screen |
1” OLED |
| Power Indication |
Power button, backlit green.
Good battery strength - glows solid. Low battery - slow flashes. Error fast flashes with 1 sec delay |
| Sensitivity |
2 µV at 12 dB Sinad with squelch defeated |
| Input Overload |
100 mV |
| Frequency Response |
200 Hz – 15 kHz, ±3dB |
| Modulation |
FM, +/- 75 kHz peak deviation |
| Signal-to-Noise Ratio |
Minimum 65 dB @ 1.0V |
| Receive Antenna |
Integral with earphone/headphone cord |
| Audio Output |
35 mW max at 16Ω |
| Headphone Connector |
3.5 mm stereo jack, mono output for stereo or mono earphones, headphones, or neckloops |
| Power Save - Display Off/Sleep Mode/Auto-Off |
Display Off: 5, 30, or 60 seconds of no button pushes (adjustable in menu)
Sleep Mode: 6 mins of no RF signal or button pushes; wakes up with RF Signal or any button push
Auto Off: 2 hours of no RF signal or button pushes |
| Soft Audio Turn-On |
Upon Power ON or Channel Change, mutes audio, then ramps up 1 numeric step per 1/10th second until
set volume is reached |
| Approvals |
FCC, Industry Canada, RoHS, WEEE |
| Warranty |
Lifetime PLUS Limited Warranty, 90 Days on most accessories |