Model: DLT 400 Specifications |
Description |
Digi-Wave 400 Digital Transceiver |
Dimensions |
4.22”W x 2.60”H x 0.50”D
(107.3 mm x 66 mm x 12.6 mm) |
Weight |
3.3 oz (94 g) including battery |
Color |
Black/Silver (Front/Back) |
Case Material |
Black ABS plastic |
Battery type |
Lithium Polymer with smart charge built into transceiver; 1800 mAH |
Battery life |
Up to 16 hrs talk time per charge@ 1ch Tx and 1ch Rx |
Power Save |
Auto Sleep Mode after 5 minutes of no RF signal from compatible devices |
Charge time |
5 hrs. approx. |
Operating frequencies |
2.4 GHz (ISM band); 2402 – 2476 MHz FHSS |
Audio Frequency response (-3dB Level) |
Intercom Mode: 100 - 7,200 Hz
Other Modes: 100 - 11,500 Hz |
SNR |
73 dB (A-weighted, default Rx volume with mic input ) |
THD |
0.1 % (Default Volume, 1kHz) |
Microphone input |
Internal microphone (disabled when MIC jack engaged) and 3.5 mm phone jack (sleeve) with electret microphone bias, adjustable gain with 63dB range. |
Line Input |
USB-C, Adjustable level |
Headphone Output |
3.5 mm TRRS headphone jack; 25 mW, R 32 Ohms |
Audio Output |
Headphone: Max SSPL 90 111.8dB (EAR 013), 116.8dB (EAR 041)
Line: USB-C, Adjustable level |
Range |
Up to 900 ft (274 m) (depending upon environmental conditions) |
Modulation |
FSK |
RF Output |
19 dBm Typical |
Security |
87 bit encryption (300 Series Compatible), 87+128 bit Encryption, Encrpytion PIN, Lock for settings |
Side tone |
-6 dB below volume, tone variation (Off, Low and High settings available) |
Indicators |
OLED |
LEDs |
Red LED around Talk button when enabled; Bi-color, changing green and red LED at top |
Charging Connectors |
USB-C; Two contacts for use with CHG 412 |
Compatible Receiver |
DLR 400 RCH, DLR 400 ALK, DLT 300 with some limitations and DLR 360 with some limitations |
Operating Temperature Range |
14º to 113ºF (-10º to 45ºC) |
Approvals |
FCC, Industry Canada, CE, RoHS 3, WEEE, RCM, ANATEL, KC, Giteki |
Warranty |
2 years parts and labor (90 days on accessories); 6 months on internal battery |