Model: 999-3008-000 Specifications
|
| Image Sensor |
Sony 1/3-type HD CMOS |
| Total Number of Pixels |
Approx. 2M pixels |
| Aspect Ratio |
HD: 16:9
SD: 4:3 or 16:9 |
| Angle of view (H) |
Approx. 50°(wide end) to Approx. 5.4°(tele end) |
| Minimum illumination |
12 LUX Typical (F1.8, 50IRE) |
| Minimum Object Distance |
10mm (wide) to 800mm (tele) |
| Optical Zoom |
10 x zoom, f=5.1mm (wide end) to 51 (tele end) F1.8 to F2.1 |
| Digital Zoom |
12X (120X Total Zoom) |
| Signal system |
HD: (16:9) : 1080/59.94i, 1080/50i, 720/59.94p, 720/50p
SD: NTSC (crop/squeeze), PAL (crop/squeeze) |
| Focus System |
Full Auto, Manual (near, far) |
| S/N Ratio |
More than 50 dB |
| Video Output HD |
HD: Analog Component Y/Pb/Pr |
| Video Output SD |
VBS:1.0 Vp-p (Sync Negative) & Y/C Output |
| Sync System |
Internal Sync |
| Camera Control Interface |
RS-232 (VISCA™, baud rate: 9.6 Kb/s, 1-stop bit)
IR Remote Controls: vaddio, Polycom (zoom and laser only) and TANDBERG (zoom and laser only) |
| Picture Effects |
Freeze, B/W, Negative Art |
| Camera Enclosure |
| Components |
Camera Enclosure, White Trim Ring, Mounting Rails and Mounting Hardware |
| Connectors |
• RJ-45 for Video and Power
• RJ-45 for RS-232 |
| Camera Enclosure Dimensions |
4.85” x 5.75” x 5.75” (H x W x D), |
| Camera Enclosure Weight |
2.4lbs |
| Quick-Connect CV HD/SD |
| Connectors |
• RJ-45 for Video and Power
• 3-BNC: Analog Component Y/Pb/Pr Outputs or SD (Y/C and composite) Outputs
• 5.5mm OD x 2.5 ID Power Connector
Note: CeilingVIEW HD can output HD or SD Video, but not both concurrently |
| Controls |
• Y-Gain Adjustment
• Distance Adjustment (for longer Cat. 5 cable runs) |
| Max Cat. 5 Cable Distance |
400 feet (191.2 m) between Quick-Connect CV HD/SD and Camera Enclosure |
| Quick-Connect CV HD/SD Dimensions |
1.75” x 5.5” x 3.0” (3.75” with BNC connectors) (H x W x D) 1/3-Rack Width |
| Quick-Connect CV HD/SD Weight |
1.0lbs |
| Power Supply |
24VDC, 2A |