Model: 999-9916-000 Specifications |
Image Sensor |
Exmor 1/2.8”, 2.38 Megapixel, Full HD (1080p/60 native) High-speed, Low Noise CMOS Image Sensor |
Lens |
30X Optical Zoom |
Horizontal FOV |
65° Wide end to 2.3° Tele end, f=4.3mm to 129mm, F1.6 to F4.7 |
Supported Resolutions |
HD Resolutions: 1080p/60/59.94/50/30/25, 1080i/60/59.94/50, 720p/60/59.94/50/30/25, 16:9 Format |
Vaddio Special Features |
Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset. Advanced ISP: Vivid and accurate color with extremely fast, razor sharp automatic focus and iris routines. |
S/N Ratio |
> 50 dB |
Minimum Illumination |
1.4 lux (F1.6, 50IRE), Recommended illumination >100 lux and above (Normal office lighting is 375-500 lux) |
Minimum Distance |
10mm (wide end) to 1.2m (tele end) |
Pan & Tilt Angle/Speed |
Pan/Tilt Angles: ±160°, Tilt: +90° to -30° / Pan/Tilt Speeds: Both Axes 0.35°/sec to 120°/sec |
Sync System |
Internal |
Control Methods |
Ethernet for Internal Web Pages and Telnet, IR Remote Commander and RS-232 for external controllers |
Operating/Storage Temperature |
0°C to +40°C (32°F to 104°F), 20% to 80% Humidity |
Dimensions |
6.942” (176.3mm) H x 7.056” (179.2 mm) W x 6.757” (171.6mm) D |
Weight |
4.85 lbs.(2.199923 kg) (About 900 peanut M&Ms) |
Quick-Connect DVI/HDMI SR |
Quick-Connect System |
Quick-Connect DVI/HDMI (two Cat-5e) for distances up to 100’ (30.84m)
HDMI or DVI-D and Analog Component YPbPr output with IR forwarding |
Connectors |
- Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
- RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
- Video Output: DE-15 connector for HD Analog Component (Y,PB,PR) video only (No SD Support)
- IR Output: Transmits modulated or non-modulated IR signals received from the HD-19 IR receiver
- Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter cable (using the Recessed Color Space Conversion Switch) , DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr
|
Video Adjustments |
Y-Gain (+/- up to 10 IRE luminance gain) for fine tuning over longer cable distances, Skew for cabling distance compensation, HDMI color space (YCbCr or sRGB) |
Cat-5 Cable Maximum Distance |
Up to 100’ (30.5m) |
Power Supply |
24 VDC, 2.0 Amp Switching Power Supply |
Dimensions |
1.6” (40.64mm ) H x 8” (203.2mm) W x 6.751” (171.45mm) D, ½-Rack Size |
Weight |
1.21 lbs. (0.548846804 kg) |
Accessory Options |
1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003
1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001
3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003 |