| Model: 999-9906-000 Specifications |
| Description |
RoboSHOT 12 QDVI System |
| RoboSHOT-12 Camera |
| Image Sensor |
Exmor 1/2.8”, 2.34 Megapixel, Full HD (1080p/60 native) High-speed, Low Noise CMOS Image Sensor |
| Lens Characteristics (2 modes) |
Super-Wide Mode: 12X Optical Zoom with 73.0° (wide end) to 6.6° (tele end), f=3.91mm to 47mm, F1.8 to F3.4
Normal Mode: 10X Optical Zoom with 67.3° (wide end) to 7.6° (tele end), f=3.8 to 38mm, F1.8 to F3.4 |
| Supported Resolutions |
HD Resolutions: 1080p/60/59.94/50/30/25, 1080i/60/59.94/50, 720p/60/59.94/50, 16:9 Format |
| Vaddio Special Features |
Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset. |
| Advanced ISP |
Vivid and accurate color with extremely fast, razor sharp automatic focus and iris routines. |
| S/N Ratio |
> 50 dB |
| Minimum Illumination |
1.0 lux (F1.6, 50IRE), Recommended illumination >100 lux and above (Normal office lighting is 375-500 lux) |
| Minimum Distance |
10mm (wide end) and 800m (tele end) |
| Pan & Tilt Angle/Speed |
Pan/Tilt Angles: ±160°, Tilt: +90° to -30
Pan/Tilt Speeds: Both Axes 0.35°/sec to 120°/sec |
| Sync System |
Internal |
| Control Methods |
Ethernet for Internal Web Pages and Telnet, IR Remote Commander and RS-232 for external controllers. |
| Operating/Storage Temperature |
0°C to +40°C (32°F to 104°F), 20% to 80% Humidity |
| Dimensions |
6.942” (176.3mm) H x 7.056” (179.2 mm) W x 6.757” (171.6mm) D |
| Weight |
4.85 lbs.(2.199923 kg) (About 2500 plain M&M) |
| Quick-Connect DVI/HDMI SR |
| Quick-Connect System |
Quick-Connect DVI/HDMI (two Cat-5e) for distances up to 100’ (30.84m)
HDMI or DVI-D and Analog Component YPbPr output with IR forwarding |
| Connectors |
- Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
- RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
- Video Output: DE-15 connector for HD Analog Component (Y,PB,PR) video only (No SD Support)
- IR Output: Transmits modulated or non-modulated IR signals received from the HD-19 IR receiver
- Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter cable (using the Recessed Color Space Conversion Switch) , DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr
|
| Video Adjustments |
Y-Gain (+/- up to 10 IRE luminance gain) for fine tuning over longer cable distances, Skew for cabling distance compensation, HDMI color space (YCbCr or sRGB) |
| Cat-5 Cable Maximum Distance |
Up to 100’ (30.5m) |
| Power Supply |
24 VDC, 2.0 Amp Switching Power Supply |
| Dimensions |
1.6” (40.64mm ) H x 8” (203.2mm) W x 6.751” (171.45mm) D, ½-Rack Size |
| Weight |
1.21 lbs. (0.548846804 kg) |
| Accessory Options |
1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003
1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001
3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003 |