High definition PTZ conferencing camera featuring tri-synchronous™ motion and 12X wide angle lens

The Quick-Connect SR interface uses two (2) Cat-5e cables to supply power to the camera, return differential video from the camera while providing bi-directional control (RS-232) for the camera over a distance of up to 100’ (30.48m).

The all-new RoboSHOT 12 HD PTZ Camera is a professional quality PTZ camera with super high quality imaging, fine detail and exceptional color reproduction. This camera offers integrators, dealers and end users with an incredible improvement over other conferencing cameras available today. The key feature of the RoboSHOT camera is Tri-Synchronous Motion, the silent direct drive pan/tilt motors, advanced Exmor® image sensor, multi-element lens and ISP (image signal processor) combination.

The Tri-Synchronous Motion algorithm in the RoboSHOT cameras is capable of moving all three (pan, tilt and zoom) axes simultaneously. The algorithm calculates the position and velocity of the smooth, direct-drive motor movements between the presets so pan, tilt and zoom arrive at the preset subject simultaneously, which finally allows for smooth and manageable on-air camera movements. Yep, there’s no more pan/tilt, then zoom like other PTZ cameras available today.

The lens, image sensor and ISP are the magic behind this camera’s remarkable video performance characteristics. The lens is a multi-element, glass lens featuring a 12X optical zoom with a 73° wide horizontal field of view (wow). The latest generation Exmor® 1/2.8”, 2.34 Megapixel, Full HD (1080p/60) high-speed, low noise CMOS image sensor combined with the new ISP produces vivid, realistic and accurate color with extremely fast, razor sharp automatic focus and iris routines.

The RoboSHOT 12 uses the Vaddio EZCamera™ System to transport HSDS™ differential video, power and control to and from the camera over Cat-5e cables. The proven Quick-Connect™ Interfaces immediately provide the ultimate in configuration flexibility. Five models of Quick-Connects are available including the Quick-Connect USB Mini, Quick-Connect SR, QuickConnect DVI/HDMI Quick-Connect USB and the Quick-Connect Universal CCU.

The RoboSHOT 12 has an Ethernet port and a built-in web server, which allows the user to control the camera functions on a web page with any browser from anywhere in the world over the IP network. Telnet, IR Remote and RS-232 control for the camera are available to satisfy almost any, if not all, system control requirements.

The RoboSHOT cameras were designed for the times and represent a new era in specifying and integrating professional quality cameras into A/V and conferencing system configurations. In short, it has never been easier to integrate cameras into any small to medium room project. The RoboSHOT 12 is perfect for small to medium sized conference rooms, training rooms or classrooms and provides incomparable support for applications including, UC conferencing, videoconferencing, distance learning, lecture capture, telepresence and more! 

RoboSHOT 12 HD PTZ camera parts review

Front:

1. Camera and Zoom Lens: This RoboSHOT model features a 12X optical zoom lens (12X in Super-Wide mode and 10X in normal mode) that is built around an Exmor 1/2.8-Type, high-speed, low noise image sensor with a total of 2.34 megapixels for exceptionally precise HD video image acquisition in a small to medium sized conference room.
2. Camera Support Arm: The RoboSHOT cameras use a single control arm for pan and tilt movements. Both ends of the cast control arm are anchored with silent and smooth BLDC (brushless DC) direct drive motors. These motors provide ultra-accurate and fast camera positioning and are capable of the slowest of crawls, which are suitable for on-air use.
3. IR Sensors: IR sensors are built into the front of the RoboSHOT to receive IR signals from the IR Remote Commander supplied with the camera. The IR sensors sit behind the Makrolon IR Window on the front of the base.
4. Multi-Color LED: The multi-colored LED indicates the use states of the camera (Purple LED: boot-up and standby modes, Blue LED: for normal operation and is a power on, ready condition (will blink when the camera receives a valid IR command), Red LED: indicates a tally function illuminating when the camera is on-air (Blinking red LED indicates a fault condition) and Yellow LED: LED illuminates during a firmware update)
5. Logo: Really Cool Logo Badge (RCLB) is located on the IR Window.
6. Camera Base: Cast zinc alloy base for strength and stability, powder coated for toughness with fine texture.

Rear:

1. Camera Settings: Dip switch settings for IR remote frequency, baud rate and image flip can be configured with these switches. See the Switch Settings page for additional information.
2. HD Video Select: A rotary switch allows the user to choose the HD video output resolution. See the Switch Settings page for additional information.
3. Network Control Port: The Ethernet 10/100 port allows the camera to be controlled from embedded web server with a web browser or through Telnet session.
4. RS-232 Port: The RS-232 port accepts modified VISCA protocol for camera control over a Cat-5e cable. This port also acts as an IR Forwarding port with the Quick-Connect SR or Quick-Connect DVI/HDMI interfaces, which allows the user to transmit 3rd party IR signals through camera to the head-end.
5. EZ-POWER VIDEO Port: The EZ-Power Video port supplies 24 VDC power to the camera and delivers HD video back to the Quick-Connect interface using high speed differential signaling over Cat-5e cable.
6. 36 VDC for CCU Only: The CCU power port is only used with Quick-Connect Universal CCU and is shipped
   with a dust cap inserted in the connector The EZ-Power Video port, becomes the Video output to the CCU, and the RS-232 connects normally. Please see the system diagrams of the CCU systems to fully understand the wiring.

Anatomy of the quick connect SR interface

The Quick-Connect Short Range provides power to the camera, and component HD video back to the Quick-Connect SR up to 100 feet over a single Cat.5 cable.  The Quick-Connect SR utilizes the EZ-Port on the back of the camera, making installation even easier.

Rear panel with feature call-outs

1. Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply.
2. EZ Camera Power & HD Video: A single Cat-5 connection between the EZCAMERA POWER & HD VIDEO RJ-45 connector and the camera’s EZ Power HD Video Port on the HD-19 camera extends power and video. Power is fed to the camera and HSDS video is returned from the camera on the same Cat-5.
3. HD Video Output: DE-15 connector outputs the YPbPr analog component HD video, which was extended from the camera over Cat- 5 cable. SD video resolutions (Y/C and CVBS formats) are not supported by the Quick-Connect SR Interface, however analog component SD (high fps format - 480p/59.94 and 576p/50) video is supported.
4. IR Output: With the IR pass-thru turned ON (see camera DIP switch settings), IR from third-party IR remote controls can be sent through the camera to third-party equipment, such as hardware videoconferencing codecs. IR can be used as either modulated (through the air) or non-modulated (wired) signals.
5. RS-232 Input and Output: These RJ-45 connectors allow an external controller (watch for upcoming shameless plug) like the ProductionVIEW™ Precision Camera Controller to route through the Quick-Connect SR for ease of cable routing.

System configuration

The Quick-Connect SR interface uses two (2) Cat-5e cables to supply power to the camera, return differential video from the camera while providing bi-directional control (RS-232) for the camera over a distance of up to 100’ (30.48m).

Diagram: Basic connectivity example of the RoboSHOT and the quick connect SR

RoboSHOT camera connected to Quick-Connect SR interface, ProductionVIEW™ precision camera controller and HD monitor.