| Model: 999-7230-000 Specifications |
| Part Numbers |
AutoTrak Wireless Audio Interface 999-7230-000 (North America) |
| Audio Specifications |
Frequency Respones: 20 HZ to 20KHZ
Dynamic Range: >75dB
THD + Noise: <.02% |
| Analog Line Output |
Connector: XLR (Balanced) & RCA (Unbalanced)
Impedance: 50 ohm (Balanced) & 10Kohm (Unbalanced)
Nominal Level: +4dBu (Balanced) & -10dBu (Unbalanced) |
| USB Audio Interface |
Connector: Type-B
Type: USB 2.0 Compliant
PC Controls: Mute & Volume |
| Radio Link |
Type: Adaptive Frequency Hopping Spread Spectrum
Frequency Range: 2400 to 2483
Antenna: Monopole
Maximum Power Output: 5dBm
Receiver Sensitivity: -83 dBm |
| Audio Proccessing Settings |
8-Position Dip Switch for Compressor, Speaker EQ Filter, Mix Mode |
| User Controls |
Power Button, Volume Up/Down, Microphone Mute, Pairing Button, LED Indicators, VU Meter |
| GPIO |
Inputs: Mute Control, Volume Up, Volume Down (Active Logic Low)
Outputs: Mute Status |
| Reciever Power Supply |
Connector: 5.5mm OD X 2.5mm ID coax receptacle
Supply: 12Vdc, 1.0 Amp |
| Serial Code Protocol |
RS-232 (Firmware Updates & ASCII Control) |
| Dimensions (HxWxD) |
Receiver: 1.72" (43.68mm) H X 18.93" (480.82mm) W X 6" (152.4mm) D with Rack Ears attached |
| Weight |
3.3 lbs (1.5 kg) |
| Power Consumption |
Maximum 12 watts |
| Operating Temperature |
32° to 104° F (0° to 40° C) |
Microphone
*Comes with AutoTrak 2.0 Lanyard |
Type: Unidirectional Condenser Microphone
Frequency Response: 100HZ to 12KHZ
Max Input Level: 115dB SPL |
Belt Pack Battery
*Comes with AutoTrak 2.0 System |
Type:4400mAH Lithium Ion
Typical Talk Time: > 18 hours
Typical Full-Charge Time: @ 9 hours (from dead battery) |
| Warranty |
One year limited warranty on all parts. |