Model: 999-6958-001 Specifications |
Description |
PTZ camera control unit system |
Part Numbers |
WallVIEW CCU HD-20 HD-SDI: 999-6958-000 (North America)
WallVIEW CCU HD-20 HD-SDI: 999-6958-001 (International) |
Vaddio ClearVIEW HD-20 |
Image Device |
6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor |
Picture Elements |
3.27M pixels (Effective) |
HD Resolutions |
1080/60i, 1080/50i, 720/60p, 720/50p, 1080/30p and 1080/25p (SD Resolutions Not Supported) |
Lens |
20x Optical Zoom, 11-Element HiLD™ (High Index Low Dispersion) Glass |
Focal Length |
F=4.7mm wide end to 94mm tele end |
Horizontal Viewing Angle |
2.9° tele end to 55.2° wide end (16:9 format) |
Invertible |
Yes - With No Frame Delay |
Video S/N Ratio |
>50 dB |
Minimum Illumination |
1.6 LUX (F1.6, 50IRE) |
Serial Control Protocol |
RS-232 (Modified VISCA) |
Min. Object Distance |
Wide End: .01m wide end, Tele end: 1.0m |
Pan Range |
+170 degrees to -170 degrees |
Tilt Range |
+90 degrees to -30 degrees |
HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
Camera Settings |
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, Unpublished Functions |
Preset Positions |
16 (internal), 6 recalled via IR Remote |
Dimensions/Weight |
7.81” (198.37mm) x 6.67” (169.42mm) x 7.057” (179.25. mm), 5.61 lbs. (2.54011744 kg.) |
Quick-Connect CCU |
Connectors |
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZIM HD-SDI Slot Card
RS-232 IN RJ-45: Accepts RS-232 (bi-directional) controller information
RS-232 OUT RJ-45: Sends RS-232 (bi-directional) to camera
G/L OUT: NA
TALLY: 2-Pin Phoenix type spring cage connector
BNC Connector for Sync (not available on HD-20)
Video Outputs: Not used in this system configuration
Video RJ-45: Not used in this system configuration |
Controls |
Scene: (A, B and C), Detail, Red Gain, Blue Gain, AWB, Shift key between Pedestal and Knee, Chroma, Gamma, Iris (Auto, Manual) and Gain |
Camera Select Switch |
All switches should be in the down position for HD-20 |
Video Adjustments |
Y-Gain (luminance gain) for fine tuning over longer cable distances
Distance Compensation: 100’, 200’, 300’, 400’+ (Not used in this system configuration) |
Cat-5e Cable Distance |
Up to 500’ (152.4m) |
Power Supply |
36 VDC, 2.78 Amp |
Dimensions |
1-RU Rack Mount - 1.75” (43.688) H x 18.93” (480.822mm) W x 6” (152.4mm) D |
Thin Profile Wall Mount HD-20 |
Materials |
12-Gauge CRS with Black Powder Coat Paint |
Dimensions |
5.125” (130.175mm) H x 6.75” (171.45mm) W x 10” (254mm) D |
Weight |
Approx. 2.4 lbs. (1.08862176kg) |
HD-SDI Slot Card |
Power Jack |
One (1) RJ-45, 36VDC used to Power Quick-Connect CCU over Cat-5e |
HD-SDI Output |
Two (2) Outputs on BNC Connectors (Carrier Class, Gold Finish Body and Contacts, Circuit Board Edge Mount) |
Slot Card Connection |
One (1) 24-pin Self Guiding Blind Mating Interface Connector |
HD-SDI Transmitter |
High Speed HD-SDI/SDI transmitter, with integrated low noise VCO and integrated cable driver (polarizing imaging inducer not included) |
Dimensions |
With Connectors and Mounting Plate: 5.875” (149.23mm) W x 4.25” (107.95) D |
Weight |
0.3lbs (.13607772 kg) |