| Model: 999-6957-100 Specifications |
| Type |
PTZ camera system |
| ClearVIEW HD-20 HD PTZ Camera |
| Image Device |
6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor |
| Picture Elements |
3.27M pixels (Effective) |
| HD Resolutions |
1080i/59.94/60, 1080/50i, 720p/59.94/60, 720/50p 1080/30p and 1080/25p (SD Resolutions Not Supported) |
| Lens |
20x Optical Zoom Lens with HiLD™ (High Index Low Dispersion) Glass, F1.6 Wide to F3.5 Tele, 11-Elements in 9-Groups |
| Focal Length |
F=4.7mm wide to 94mm tele |
| Horizontal Viewing Angle |
2.9 to 55.2 degrees - 16:9 Format |
| Video S/N Ratio |
>50 dB |
| Invertible |
Yes - Without Frame Delay |
| Minimum Illumination |
1.6 LUX (F1.6, 50IRE) |
| Serial Control Protocol |
RS-232 (Modified VISCA) |
| Pan Range |
Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees |
| Min. Object Distance |
Wide End: .01m wide end, Tele end: 1.0m |
| Preset Positions |
16 (internal), 6 recalled via IR Remote |
| Image Control |
Red & Blue Gain, Detail, Chroma, Gamma, Pedestal, Iris, and Gain (available through RS-232 control) |
| Tally Light |
Available through RS-232 Control |
| HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
| Camera Settings |
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, Unpublished Functions |
| Accessory Slot Cards |
EZIM HD-SDI Slot Card PN# 998-6900-007
EZIM CCU Slot Card PN# 999-6900-006 - For Use with Quick-Connect CCU Only |
| General Information |
| Operating Temperature |
32° to 104° F (0° to 40° C) |
| Power Consumption |
Maximum 25 watts (without accessory card) |
| Dimensions (H x W x D) |
7.81” (198.37mm) x 6.67” (169.42mm) x 7.057” (179.25. mm) |
| Weight |
5.6 lbs. (2.63083592 kg.) |
| WallVIEW CCU HD-20 |
| User Controls |
White Balance (auto, manual) Red and Blue Gain, Pedestal, Knee, Chroma, Gamma, Detail, Gain, Iris, 3-Scene Presets, Select and Cancel |
| Connectors |
5.5mm OD x 2.5mm ID Power Connector, RJ-45 for 36 VDC on 4pr. CAT-5, RJ-45 for RS-232 IN, RJ-45 for RS-232 OUT, 2-pos Molex 5.0mm Euro Connector for Tally, 8-pin Dip Switch for camera functions, RJ-45 for Differential Video Return, DE-15 for YPbPr out, HDMI for HDMI, and a BNC for HD-SDI |
| Video Adjustments |
In Menu, Y-Gain and Cable Distance Presets |
| CAT-5 Cable Distance |
Up to and including 500’ (152.4m) |
| Power Supply |
36VDC, 2.78 Amp Switching Power Supply (International systems receive the Euro and UK power cables) |
| Dimensions |
1.72” (43.7mm) H x 18.93 (480.8mm) W (with rack ears) and 7” (177.8mm) D |
| Weight |
3.45 lbs (1.5649kg) |