| Model: 999-6940-000AW Specifications |
| Type |
PTZ Camera system |
| ClearView HD-19 Camera |
| Image Sensor |
1/3-Type Exmor High-speed, Progressive Scan CMOS Sensor with 1.3 Megapixels |
| Video Output Resolutions |
HD: 1080p/60/59.94/50/30/25, 1080i/59.94/50, 720p/59.94/50
SD: 480i/NTSC & 576i/PAL (Crop, Squeeze or Letterbox mode) |
| Lens/ Focal Length |
19X Optical Zoom, F=4.5mm wide to 85mm tele (F1.6-F2.9), Min. Focus Distance 1.0m |
| Horizontal Viewing Angle |
58.1° Wide End to 3.2° Tele End - 16:9 Format |
| Video S/N Ratio |
>52 dB |
| Minimum Illumination |
0.7 LUX (F1.6, 50IRE) |
| Serial Control Protocol |
RS-232 (Modified VISCA) |
| Pan Range |
Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees, Invertible for Ceiling Mount |
| Preset Positions |
16 (internal), 6 recalled via IR Remote |
| Tally Light |
Available through RS-232 Control |
| Connectors |
12 VDC Power Input: EIAJ-04 Coaxial Power Connector
HD Video Outputs: YPbPr on DE-15 (D-Sub 15-pin HD)
SD Video Output: BNC Connector
RS-232/IR Out: RJ-45 Jack (RS-232 Communication and IR Out
(with Quick-Connect -SR Interfaces)
EZ Power HD Video: RJ-45 Jack, for use with Quick-Connect SR Interface or Quick-Connect DVI/HDMI. SR Interface. Supplies power to the camera and returns HD video from the camera to the Quick-Connect - SR Systems. |
| HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
| Camera Settings |
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip, SD LB and SQ, Test Bars OSD (On Screen Display) for fine tuning |
| Accessories |
Thin Profile Wall Mount 535-2000-230 (Black), 535-2000-230W (White)
EZIM HD-SDI Slot Card PN# 998-6900-007
EZIM CCU Slot Card PN# 999-6900-006 - For Use with Quick-Connect CCU Only |
| General Information |
| Operating Temperature |
32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity |
| Dimensions (H x W x D) |
8.5” (215.9mm) H x 6.75” (171.45mm) W x 7.7” (195.58mm) D |
| Weight |
5.79 lbs. (2.625635463kg.) |
| Color |
White |
| Qucik-Connect USB |
Compatible Vaddio
Cameras |
PowerVIEW HD-22 & HD-30, ClearVIEW HD-19,HD-18, HD-20, ZoomSHOT, WideSHOT, CeilingVIEW HD-18, REVEAL Clear and REVEAL Frosted, North American and International Versions Supported |
| Cat-5 Cabling |
Two (2) Cat-5 connections; 1 st : EZ-Power Video (power to camera & video from camera), 2 nd : RS-232 Control |
| Control Type |
Internal Web Server (browser-based control), Telnet and RS-232 Control |
| Cat-5 Max. Distance |
100’ 30.48m with PTZ cameras, more with stationary POV cameras |
| Connectors |
USB 2.0 on Type-B female, Ethernet 10/100 on RJ-45F with LEDs, EZ-Power Video on Shielded RJ-45F, RS-232 to Camera on Shielded RJ-45F, RS-232 IN: RJ-45F, YPbPr on DE-15F, HDMI-F video connector |
| Streaming |
IP Video (H.264) in RTSP and HLS formats and USB 2.0 Video (UVC Drivers and MJPEG) |
| Resolutions |
HDMI and HDMI set on Camera, IP and USB set on Web Pages, USB auto negotiated, IP has variable bit rate |
| Dip Switch Settings |
HDMI (YCbCr) or DVI (sRGB) Color Space, Factory Default Reset and Future Controls |
| Enclosure |
1-RU - ½ Rack Size, Optional ½ Rack Mount Kit Accessory 998-6000-004 |
| Power |
24 VDC, 2.0 Amp on 5.5mm OD x 2.5mm ID Coaxial Connector, Positive Center |