Model: 999-6946-000AW Specifications |
Type |
PTZ camera system |
Vaddio HD-19 |
Image Sensor |
1/3-Type Exmor High-speed, Progressive Scan CMOS Sensor with 1.3 Megapixels |
Video Output Resolutions |
HD: 1080p/60/59.94/50/30/25, 1080i/59.94/50, 720p/59.94/50
SD: 480i/NTSC & 576i/PAL (Crop, Squeeze or Letterbox mode)
Color: The Recessed Color Space Conversion Switch enables the use of either HDMI YCbCr or DVI-D sRGB (RGBHV) color space for added flexibility. |
Lens/ Focal Length |
19X Optical Zoom, F=4.5mm wide to 85mm tele end (F1.6-F2.9), Min. Focus Distance 1.0m |
Horizontal Viewing Angle |
58.1° Wide End to 3.2° Tele End - 16:9 Format |
Video S/N Ratio |
>52 dB |
Minimum Illumination |
0.7 LUX (F1.6, 50IRE) |
Serial Control Protocol |
RS-232 (Modified VISCA) |
Pan Range |
Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees, Invertible for Ceiling Mount |
Preset Positions |
16 (internal), 6 recalled via IR Remote |
Tally Light |
Available through RS-232 Control |
Connectors |
12 VDC Power Input: EIAJ-04 Coaxial Power Connector
HD Video Outputs: YPbPr on DE-15 (D-Sub 15-pin HD)
SD Video Output: BNC Connector
RS-232/IR Out: RJ-45 Jack
(RS-232 Communication and IR Out (with Quick-Connect -SR Interfaces)
EZ Power HD Video: RJ-45 Jack, for use with Quick-Connect SR Interface or Quick-
Connect DVI/HDMI SR Interface. Supplies power to the camera and returns HD video from the camera to the Quick-Connect - SR Systems. |
HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
Camera Settings |
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600,
Image Flip, SD LB and SQ,
Test Bars
OSD (On Screen Display) for fine tuning |
Accessories |
EZIM HD-SDI Slot Card PN# 998-6900-007
EZIM CCU Slot Card PN# 999-6900-006 - For Use with Quick-Connect CCU Only |
Operating Temperature |
32° to 104° F (0° to 40° C) / 20% to 80% Relative Humidity |
Dimensions (H x W x D) |
8.5” (215.9mm) H x 6.75” (171.45mm) W x 7.7” (195.58mm) D |
Weight |
5.79 lbs. (2.625635463kg.) |
Color |
White |
Quick-Connect DVI/HDMI SR (Short Range) Interface |
Connectors |
Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT,
EZCamera Power Video Port
Video Output: DE-15 connector for HD Analog Component (Y,PB,PR)
video only (No SD Support)
IR Output: Transmits modulated or non-modulated IR signals
received from the HD-19 IR receiver
Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter
cable (using the Recessed Color Space Conversion Switch) ,
DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr |
Cat-5e Cable Distance |
Up to 100’ (30.5m) |
Power Supply |
24 VDC, 2 Amp |
Dimensions / Weight |
1.6” (40.64mm ) H x 8” (203.2mm) W x 6.751” (171.45mm) D, ½-Rack Size / 1.21 lbs. |
Accessory Options |
1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003
1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001
3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003 |
CONCEAL Wall Mounting System for Vaddio ClearVIEW HD-19 |
Dimensions |
5.125” H x 6.75” W x 10” D (13 cm x 17.15 cm x 25.4 cm) |
Weight |
Approx. 2.4 lbs. (1.1kg) |