| Model: 999-6000-000 Specifications |
| Image Device |
3CCD |
| Lens |
12x |
| Outputs |
Y/C (S-Video) / Composite |
| Video Standards |
NTSC / PAL |
| TVL |
600 |
| Megapixels |
1.07 |
| Output cards |
Optional |
| Includes |
PowerRite power supply
IR Remote
AC cord set |
| BRBK-301 |
| Output connector |
RGB/SYNC: D-sub 9-pin (1) |
| Output signal |
Composite video: 1 Vp-p, 75 ohms unbalanced, sync negative
S video:Y: 1 Vp-p, 75 ohms unbalanced, sync negative C: same level as that of the chroma signal of composite video
R/G/B: 1 Vp-p, 75 ohms unbalanced, sync negative (with sync ON)
Component video: Y: 1 Vp-p, 75 ohms unbalanced, sync negative Sync: 2 Vp-p, 75 ohms unbalanced, sync negative |
| Power Supply |
12 V DC (supplied from the camera or the Optical Multiplex Unit) |
| Power consumption |
2.5 W max. |
| Operating temperature |
0degC to 40degC (32degF to 104degF) |
| Operating humidity |
20% to 80% (no condensation) |
| Storage temperature |
-20%degC to +60degC (-4degF to +140degF) |
| Storage humidity |
20% to 95% (no condensation) |
| Dimensions |
120 x 25 x 87 mm (w/h/d) (4 3/4 x 1 x 3 1/2 inches) (not including the projected parts) |
| Mass |
Approx. 100g (4 oz) |
| Supplied accessories |
Operating Instructions |
| BRBK-302 |
| Output connector |
SDI: BNC type (1) |
| Output signal |
SMPTE259M SDI format (270 Mbps)
0.8 Vp-p, 75 ohms unbalanced
Sampling frequency: Y: 13.5 MHz, Cr/Cb: 6.75 MHz
Sampling: 8 bits
EDH: Conforms to SMPTE RP165 |
| Power Supply |
12 V DC (supplied from the camera or the Optical Multiplex Unit) |
| Power consumption |
1 W max. |
| Operating temperature |
0degC to 40degC (32degF to 104degF) |
| Operating humidity |
20% to 80% (no condensation) |
| Storage temperature |
-20%degC to +60degC (-4degF to +140degF) |
| Storage humidity |
20% to 95% (no condensation) |
| Dimensions |
120 x 25 x 87 mm (w/h/d) (4 3/4 x 1 x 3 1/2 inches) (not including the projected parts) |
| Mass |
Approx. 100g (4 oz) |
| Supplied accessories |
Operating Instructions |
| BRBK-304 |
| Output connector |
DV OUT: 6-pin |
| Output signal |
Conforms to IEEEI394 S100
DV format (with no power support, no audio signal) |
| Power Supply |
12 V DC (supplied from the camera or the Optical Multiplex Unit) |
| Power consumption |
2.5 W max. |
| Operating temperature |
0degC to 40degC (32degF to 104degF) |
| Operating humidity |
20% to 80% (no condensation) |
| Storage temperature |
-20%degC to +60degC (-4degF to +140degF) |
| Storage humidity |
20% to 95% (no condensation) |
| Dimensions |
136 x 21 x 74.6 mm (w/h/d) (5 3/8 x 27/32 x 3 inches) (not including the projected parts) |
| Mass |
Approx. 200g (8 oz) |
| Supplied accessories |
i.LINK cable VMC-IL6615B (6-pin, 1.5 m (59 1/8 inches)), CCF-3L (6-pin, 3.5m (137 7/8 inches)) |