![One-link]()
OneLINK system for cisco precision 60 cameras
The Vaddio OneLINK for Cisco Precision HD Cameras is built for use with the Cisco PrecisionHD 1080p 12x and PrecisionHD 720p high definition PTZ cameras and the Cisco C20, C40, C60 and C90 codecs (camera and codec not included).
The OneLINK system uses Vaddio’s Super-HSDS™ active high speed digital bus technology for video, power and control over Cat-5e, but with one very important difference. The OneLINK uses only One (1) Cat-5e cable for HD digital video, power and control at distances up to 125’ (38.1m). It sends and regulates power to the camera, provides a bi-directional control channel and transmits/receives uncompressed HD digital video, up to and including 1080p/60Hz, all on one (1) Cat-5e cable.
The OneLINK is a complete peripheral system and comes with the Quick-Connect, the EZIM, and three (3) 1’ (30.5cm) native cables at the camera (HDMI, 5.5mm OD x 2.1 mm ID Coax power cable, and RJ-45 patch cable). It is a totally awesome camera mount made specifically to mount the PrecisionHD series PTZ cameras and the EZIM is also included. The OneLINK for Cisco Precision HD cameras also has many additional features including the ability to forward RS-232 information from the camera to the codec and auto recognition of the camera when used with the Cisco C-series codecs
OneLink & EZIM connector features
![Onelink_connector]()
- Vaddio Blue LED Power Indicator: Lit when power supply is plugged in.
- Power Input: 48 VDC, 1.4 Amp Power Connection, 5.5mm OD x 2.5mm ID, positive center.
- OneLINK Port: Supplies power to the camera, bi-directional RS-232 communication and receives HDM (digital video) from the camera.
- HDMI Output: To videoconferencing system RS-232 Control Port: For communication (TX and RX) between the camera and codec. Please use the provided control adapter 998-1008-232 and a regular Cat-5e cable (not supplied) between the codec Camera Port and the Camera Control Port on the Quick-Connect OneLINK. Please do not use the DB-9M to RJ-45 cable # 116627 that ships with the codec.
![Onelink_EZIM]()
- Power Output: 12 VDC, 2 Amp Power Connection to Camera, 5.5mm OD x 2.1mm ID, positive center.
- RS-232 Control Port: For communication (TX and RX) between the camera and codec.
- HDMI Input: Connect the HDMI output of the camera to the EZIM HDMI VIDEO IN.
- OneLINK Port: Receives and regulates power, bi-directional RS-232 and transmits HDMI (digital video) from the camera back-plane to the Quick-Connect OneLINK and codec.
OneLINK diagram:
![onelink_drawing]()