vaddio 999-9963-100W RoboSHOT 30 Camera

Vaddio’s Tri-Synchronous Motion technology

Using HDBaseT technology, Vaddio RoboSHOT OneLINK HDBT Systems make professional quality, High-definition video integration even easier.

RoboSHOT OneLINK HDBT Systems combine a Vaddio RoboSHOT HDBT Camera, Thin Profile Camera Wall Mount, and Vaddio OneLINK HDMI Extension System for HDBaseT into one convenient kit. Vaddio RoboSHOT HDBT Systems enable quick integration, extending HD video, 100BaseT Ethernet, RS-232, and power up to 100 meters/328 feet on a single standard Cat-5e/6 cable.

As with all Vaddio RoboSHOT Cameras, RoboSHOT HDBT Cameras use Vaddio’s Tri-Synchronous Motion technology, which allows all three axes of the camera (pan, tilt, and zoom) to move simultaneously for ultra-smooth, natural camera motion.  And the built-in web interface enables cameras to be accessed and managed remotely from any web browser over the IP network.

One cable means easier installations

RoboSHOT HDBT Cameras use a Cat-5e/6e cable to power the camera, control the camera, and send the video signals to the equipment rack – all with just one cable, which greatly simplifies installation and integration. Direct connect to HDBaseT compatible devices or pair with the Vaddio OneLINK HDMI receiver to extend the camera’s HDMI signal up to 100 meters (329 feet).

Exceptional Image

• New Exmor R™ image sensor gives the RoboSHOT 30 HDBT Camera better light gathering capabilities, providing incredible contrast, vivid colors and sharp images – even in dimly lit rooms
• RoboSHOT 30 HDBT cameras offers superior wide dynamic range (WDR) for clear detail in high-contrast, bright lighting conditions
• Tri-Synchronous Motion technology allows all three axes of the camera (pan, tilt and zoom) to move simultaneously for ultra-smooth, natural camera motion
• Simultaneous HDBaseT, HDMI and IP (H.264) streaming
• RoboSHOT 30 HDBT: 30x zoom and a 2.3° (tele) to 65° (wide) horizontal FOV

Configuration and Control

It can be possible to control the camera using a handheld IR remote control, a browser-based graphical user interface, or via command line using Telnet or a serial RS-232 connection. A handheld IR remote control shall be included with the camera. It shall be possible to use the remote to control up to three cameras.

The web-based graphical user interface shall provide full physical and administrative control of the camera. It shall be accessed through commonly used web browsers including the current and next most recent versions of Chrome®, Firefox®, Safari®, and Internet Explorer®.

Installation Requirements

Maximum cable length for Cat-5e cables shall be 328 ft (100m). The camera is designed for use with a Vaddio OneLINK HDMI camera extension module, which allows an additional 328 ft (100 m) cable length. The camera is also designed to attach to a wall or ceiling mount in an indoor environment. A wall mounting shelf shall be provided with the camera. The 999-9963-100 can support inverted operation with image flip and inversion of pan and tilt controls. The camera also uses standard Cat-5e/Cat-6/Cat-7 cables for network and control connections.