vaddio 999-9963-000 RoboSHOT 30 HDBT Camera

Features Vaddio’s Tri-Synchronous Motion technology

As with all Vaddio RoboSHOT 30 camera, RoboSHOT HDBT camera features Vaddio’s Tri-Synchronous Motion technology, which allows all three axes of the camera (pan, tilt, and zoom) to move simultaneously for ultra-smooth, natural camera motion. And the built-in web interface enables cameras to be accessed and managed remotely from any web browser over the IP network.

The camera optics features a 30x optical zoom lens. The camera uses a 1/2.8-type, high-speed, low noise, backlit CMOS image sensor with 2.38 total megapixels (2.14 megapixels effective). It provides HDMI® output plus IP (H.264) streaming. It also uses silent, brushless DC direct drive motors for accurate camera positioning and smooth motion, providing pan and tilt speeds from 0.35° to 120° per second.

The camera body incorporates an indicator to show camera status and IR sensors built into the front, to receive IR signals from a handheld IR remote control. It is designed for use with the Vaddio OneLINK HDMI camera extension module for HDBaseT cameras, and compatible with Vaddio camera controllers, mixers, and other equipment.

Exceptional Image

• New Exmor R™ image sensor gives the RoboSHOT 30 HDBT Camera better light gathering capabilities, providing incredible contrast, vivid colors and sharp images – even in dimly lit rooms
• RoboSHOT 30 HDBT cameras offers superior wide dynamic range (WDR) for clear detail in high-contrast, bright lighting conditions
• Tri-Synchronous Motion technology allows all three axes of the camera (pan, tilt, and zoom) to move simultaneously for ultra-smooth, natural camera motion
• Simultaneous HDBaseT, HDMI and IP (H.264) streaming
• 30x zoom and a 2.3° (tele) to 65° (wide) horizontal FOV

Configuration and Control

It can be possible to control the camera using a handheld IR remote control, a browser-based graphical user interface, or via command line using Telnet or a serial RS-232 connection. A handheld IR remote control includes the camera. It is possible to use the remote to control up to three cameras.

The web-based graphical user interface provides full physical and administrative control of the camera. It is accessed through commonly used web browsers including the current and next most recent versions of Chrome®, Firefox®, Safari®, and Internet Explorer®.

Installation Requirements

Maximum cable length for Cat-5e cables shall be 328 ft (100m). The camera is designed for use with a Vaddio OneLINK HDMI camera extension module, which allows an additional 328 ft (100 m) cable length. The camera is also designed to attach to a wall or ceiling mount in an indoor environment. A wall mounting shelf shall be provided with the camera. The 999-9960-000 can support inverted operation with image flip and inversion of pan and tilt controls. The camera also uses standard Cat-5e/Cat-6/Cat-7 cables for network and control connections.