| Model: 999-9919-000W Specifications |
| Description |
RoboSHOT 30 QUSB System, White |
| Image Device |
1/2.8-Type Exmor CMOS Sensor |
| Video Resolution/Frequencies |
1080p60/59.94/50/30/25, 1080i/60/59.94i/50, 720p/60/59.94/50/30/25 |
| Vaddio Special Features |
Tri-Synchronous Motion: Concurrent PTZ motor movement and simultaneous PTZ arrival at a stored preset
Advanced ISP: Vivid and accurate color reproduction with extremely fast, razor sharp automatic focus and iris routines |
| Video Aspect Ratio |
16:9 Aspect Ratio for all resolutions |
| Effective Pixels |
2.14 Million Effective pixels
2.38 Million Total Pixels |
| Lens and Horizontal FOV |
30X Optical Zoom
65° (wide end) to 2.3° (tele end), F1.6 to F4.7 |
| Minimum illumination |
1.4 lx (F1.6, 50IRE), recommended illumination >100 lux and <100,000 lux |
| Minimum working distance |
10mm (wide), 1.2m (tele) |
| S/N ratio |
More than 50 dB |
| Sync system |
Internal |
| White balance |
Auto, ATW, Indoor, Outdoor, One-push, Manual (accessible through external control) |
| Gain |
Auto / Manual (0 to 28 steps - accessible through external control) |
| Back-light compensation |
On/Off (IR Remote) |
| Focusing system |
Auto Focus / Manual Focus Mode / One Push Trigger Mode / Infinity Mode / Near Limit Mode |
| Noise Reduction |
On/Off, 6 Steps, Off through 5 (accessible through external control) |
| Aperture/Detail |
16 Steps (accessible through external control) |
| Control Interface(s) |
RS-232 API: Modified VISCA Emulation (TTL signal level) Baud rate: 9600 bps and 38,400 bps, 1-Stop bit. Default to 9.6 Kb/s for Cat-5e Distance
Telnet Serial Command API
Internal Web page for Network Set-up, firmware updates and network management
Vaddio IR Remote Commander |
| Pan & Tilt Angle/Speed Pan/Tilt Angles |
±160°, Tilt: +90°, -30°
Pan/Tilt Speeds: Both Axes 0.35°/sec to 120°/sec |
| Rear Panel Connectors |
Network: RJ-45 with Green & Yellow LED to show connection and usage
RS-232 Out: RJ-45, Carries bidirectional control to and from the camera
EZ Power Video: RJ-45 Shielded, carries power and differential video signals for the Quick-Connect Cat-5 systems |
| Rear Panel Controls |
16-Position Rotary Switch for Resolution selection
8-Position DIP Switch for IR Frequency, Image Flip, wide mode and Reset to Default Settings |
| Power Supply |
Powered by Quick-Connect interfaces |
| Compatible Joystick and Video Control Consoles |
ProductionVIEW Precision Camera Controller
ProductionVIEW HD
ProductionVIEW HD MV with Integrated Multi-viewer,
ProductionVIEW HD-SDI MV with Integrated Multi-viewer
AV Bridge MATRIX PRO |
| Operating/Storage Temperature/Humidity |
0°C (32°F) to 40°C (104°F), 20% to 80% |
| Mass |
4.85 lbs.(2.1999235643 kg) |
| Dimensions |
Small (3 dimensions not counting space/time)
6.942” (176.3mm) H x 7.056” (179.2 mm) W x 6.757” (171.6mm) D |
| Quick-Connect USB |
| Video Outputs |
USB 2.0 (MJPEG): Resolution up to 720p/30 (USB 2.0 MJPEG)
H.264 (IP) on Ethernet: Resolution up to 1080p/30 (H.264 over IP)
Analog Component (YPbPr): Resolution up to 1080p/60
HDMI: Resolution up to 1080p/60 |
| Connectors |
Power: 5.5mm OD x 2.5mm ID Coaxial Connector
YPbPr: DE-15 (15-pinHD) Female
HDMI: HDMI Female
RS-232 IN: RJ-45 Jack
RS-232 OUT: RJ-45 Jack
EZ-Power Video: RJ-45 Jack (Power and Differential HD Video) |
| Cat-5e Cabling/Maximum Distance |
Two (2) Cat-5e cables (EZ-Power Video and RS-232) Max Distance up to 100’ (30.48m) |
| Power Supply |
24 VDC, 2.08 Amp Switching Power Supply |
| Dimensions/Weight |
½-Rack Size - 8.375” ( 212.73mm) W x 6.0” (152.4mm) x 1.72” ( 43.688mm) H, 1.4 lbs. (0.635kg) |
| Accessory |
Rack Mount Adapter: 998-6000-004 - 1-RU Offset mount (1-Long ear & 1-Short Ear) |