Vaddio 999-9590-000 OneLINK HDMI Extension for RoboSHOT HDMI Cameras
- Single Cat-5e/6 camera extension system using HDBaseT™
- Includes OneLINK HDMI Interface
- Includes OneLINK HDMI EZIM (camera-end) and camera cables
Extends HDMI video, power and control on a single Cat-5e/6 cable
at distances of up to 328' (100m)
Sends and regulates power to the camera
The Vaddio 999-9590-000 OneLINK HDMI Extension for RoboSHOT HDMI Cameras is an HDBaseT camera extension system that extends HDMI video, power and control on a single Cat-5e/6 cable at distances of up to 328' (100m). The OneLINK allows for simplified, economical and faster installations. The OneLINK system sends and regulates the power to the camera, provides bi-directional control channels for Ethernet and RS-232 and transmits/receives uncompressed HDMI video up to 1080p/60 and up to 2160p/30 for the future.
OneLINK EZIM: EZCamera Interface Module
The system consists of the small OneLINK EZIM (EZCamera Interface Module) camera interface at the camera location and the OneLINK HDMI Interface. The EZIM provides the required camera connectivity and is mounted to the underside of the RoboSHOT HDMI camera's thin profile wall mount with two 6-32 x .188" black mounting screws. All the 12" (305mm) patch cables on the camera end are provided with the OneLINK system including an HDMI cable, a power cable and two Cat-5e cables for network and RS-232. The thin profile wall mount can be mounted directly to a 2-gang sized electrical box for conduit installations or directly to the drywall with wall anchors.
An easy to install, single cable camera extension solution
From one end to the other, the OneLINK system provides system integrators with an easy to install, simple and elegant, single cable camera extension solution, which exemplifies Vaddio’s main tenet.
System Drawing - Configuration Example:
Please view the Vaddio OneLINK HDMI video below: