| Model: 999-9575-000 Specifications |
| Description |
Cisco Codec Kit for OneLINK HDMI to Vaddio HDBaseT Cameras |
| Includes |
OneLINK HDMI Interface
Quick-Start Guide
48V power supply with AC cord set(s)
3' (0.9m) cat-5 cable, black
3' (0.3m) directional cat-5 cable for Cisco SX20**
3' (0.9m) HDMI cable
EZCamera RS-232 Control Adapter
EZCamera RS-232 Control Adapter 998-1002-232 for Cisco codec serial 9-pin ports |
| OneLINK HDMI Interface |
| Compatible Cameras |
Cabling Kit for RoboSHOT 12 HDMI and RoboSHOT 30 HDMI |
| Video Support |
HDMI resolutions up to 1080p/60 for RoboSHOT HDMI cameras and 2160p/30 for the future. |
| RS-232 Support |
Pass-through |
| Ethernet Support |
Pass-through |
| Camera Power Support |
12 VDC, 3 Amp from EZIM to Camera. |
| Cabling Distances |
328’ (100m) over Cat-5e (Best Practices - When in doubt of EMI or RF interference in the area
that OneLINK is being installed, use shielded Cat-6 cable). |
| OneLINK Interface Power Supply |
48 VDC, 1.36 Amp |
| Connectors on OneLINK Interface |
OneLINK Port on Shielded RJ-45F, HDMI Output Receptacle, Ethernet on shielded RJ-45F
with LEDs, RS-232 on shielded RJ-45 connector, Power in on 5.5mm OD x 2.5mm ID Coaxial
connector (positive Center), IR Forward on 3-pin Phoenix-style connector |
| Connectors on OneLINK EZIM |
OneLINK Port on Shielded RJ-45F, HDMI Input Receptacle, Ethernet on shielded RJ-45F with
LEDs, RS-232 on shielded RJ-45 connector, Power out on EIAJ-04 connector |
| OneLINK Interface Dimensions (H x W x D - not including space-time) |
1.72” (43.7mm) H x 8.375” (212.7mm) W x 6.00” (152.4mm) D |
| OneLINK EZIM Dimensions (H x W x D) |
3.861” (98.07mm) H x 4.310” (109.47mm) W x 1.24” (31.5mm) D |
| OneLINK Interface Weight |
1.553 lbs. (703.1g) |
| OneLINK EZIM Weight |
0.553 lbs. (249.5g) |
| Operating Temperature/Humidity |
0°C (32°F) to 40°C (104°F), 20% to 80% Relative Humidity |