Model: 999-9560-000 Specifications |
Description |
OneLINK HDMI for Precision 60 |
Compatible Camera |
Cisco Precision 60 PTZ Camera (camera not included) |
Compatible Codecs |
Cisco SX-80 Codecs (codec not included) |
Control Types Supported |
Ethernet and RS-232 |
Cabling |
Single Cat-5e or better cable between the OneLINK Interface and the OneLINK EZIM. |
Connectors on OneLINK HDMI Interface |
OneLINK Port on Shielded RJ-45F, HDMI Receptacle, Ethernet on shielded RJ-45F with LEDs, RS-232 on shielded RJ-45 connector, Power on 2.5mm x 5.5mm coaxial connector, IR Forward on 3-pin Phoenix-style connector |
Connectors on EZIM HDMI |
OneLINK Port on Shielded RJ-45F, HDMI Receptacle, Ethernet on shielded RJ-45F with LEDs, RS-232 on shielded RJ-45 connector, Power on EIAJ-04 |
Supported Resolutions |
Up to 1080p/60 for the Precision 60 camera and up to 2160p/30 for the future |
Cabling Max. Distances |
Up to 328' (100m) over Cat-5e or better cable |
Best Practices |
If uncertain about EMI interference in the area where the OneLINK is to be installed, use shielded Cat-6 cable for best results |
Power Supply |
48 VDC, 1.36 Amp Switching Power Supply |
EZIM Dimensions |
1.72" (43.7mm) H x 8.375" (212.7mm) W x 6" (152.4mm) D |
OneLINK Interface Dimensions |
8.375" (212.72mm) W x 6" (152.4mm) D x 1.72" (43.69mm) H |
EZIM Flange Bolt Hole |
2 holes @ .175" (4.44mm) with 2.5" (63.5mm) on-center spacing |
EZIM Mass |
0.553 lbs (0.251 kg) |
OneLink Interface Mass |
1.55 lbs (0.704 kg) |
Warranty |
Two (2) year limited warranty on all parts and labor |