Model: 999-9545-000 Specifications |
Description |
Polycom Codec Kit for OneLINK HDMI to Vaddio HDBaseT Cameras |
Includes |
OneLINK HDMI Interface
Quick-Start Guide
48V power supply with AC cord set(s)
2' (0.6m) fan-out cable for Polycom, codec side
1 qty 3-position phoenix-style connector
EZCamera RS-232 Control Adapter |
OneLINK HDMI Interface |
Compatible Cameras |
Cabling Kit for RoboSHOT 12 HDMI and RoboSHOT 30 HDMI |
Video Support |
HDMI resolutions up to 1080p/60 for RoboSHOT HDMI cameras and 2160p/30 for the future. |
RS-232 Support |
Pass-through |
Ethernet Support |
Pass-through |
Camera Power Support |
12 VDC, 3 Amp from EZIM to Camera. |
Cabling Distances |
328’ (100m) over Cat-5e (Best Practices - When in doubt of EMI or RF interference in the area
that OneLINK is being installed, use shielded Cat-6 cable). |
OneLINK Interface Power Supply |
48 VDC, 1.36 Amp |
Connectors on OneLINK Interface |
OneLINK Port on Shielded RJ-45F, HDMI Output Receptacle, Ethernet on shielded RJ-45F
with LEDs, RS-232 on shielded RJ-45 connector, Power in on 5.5mm OD x 2.5mm ID Coaxial
connector (positive Center), IR Forward on 3-pin Phoenix-style connector |
Connectors on OneLINK EZIM |
OneLINK Port on Shielded RJ-45F, HDMI Input Receptacle, Ethernet on shielded RJ-45F with
LEDs, RS-232 on shielded RJ-45 connector, Power out on EIAJ-04 connector |
OneLINK Interface Dimensions (H x W x D - not including space-time) |
1.72” (43.7mm) H x 8.375” (212.7mm) W x 6.00” (152.4mm) D |
OneLINK EZIM Dimensions (H x W x D) |
3.861” (98.07mm) H x 4.310” (109.47mm) W x 1.24” (31.5mm) D |
OneLINK Interface Weight |
1.553 lbs. (703.1g) |
OneLINK EZIM Weight |
0.553 lbs. (249.5g) |
Operating Temperature/Humidity |
0°C (32°F) to 40°C (104°F), 20% to 80% Relative Humidity |