| Model: 999-6987-000 Specifications |
| Description |
ClearVIEW HD-20SE QCCU System, Black |
| Image Sensor |
1/2.8-Type Exmor, high-speed, low-noise CMOS Image Sensor
2.38 Megapixels: (2.14M effective pixels). |
| Zoom |
20X Optical Zoom with Multi-element Glass Lens |
| Field of View |
Horizontal: 63º Wide End to 3.47º Tele End, (16:9 Aspect Ratio)
Vertical: 36.8˚ Wide End to 1.85˚ Tele End |
| Lens Focal Length |
f=4.44mm to 89mm / F1.6 - F3.4 |
| Minimum Illumination |
Color: 0.3 Lux (F1.6, 1/30 sec, 50 IRE), B/W: 0.03 Lux (F1.6, 1/30 sec, 50 IRE) |
| Video Resolutions |
HD: 1080p/60/59.94/50./30/25, 1080i60/59.94/50 and 720p/60/59.94/50
HD Video Resolutions Only at 16:9 |
| White Balance |
Auto, Manual (Red and Blue Gain), OPWB, Indoor, Outdoor and Fluorescent |
| Video Output Formats |
HDMI, Analog Component, HSDS (Differential Video, Power and Control for Quick-Connects) |
| Signal to Noise Ratio |
Greater than 50 dB (AGC: Off) |
| Compatible Quick-Connects |
Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and Quick-Connect Universal CCU |
| Pan Range |
Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees |
| Preset Positions |
16 (internal), 6 recalled via IR Remote |
| Control Methods |
RS-232, IR Remote Commander and OSD (on screen display) |
| Tally Ligh |
t Available through RS-232 Control |
| HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
| Camera Settings |
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip and Color Space |
| Accessory Slot Cards |
HD-SDI Slot Card, Part Number 998-6900-007 (3Gb/s Single Link)
EZIM CCU Slot Card, Part Number 998-6900-006 |
| Dimensions/Weight |
7.81” (198.37mm) H x 6.67” (169.42mm) W x 7.057” (179.25. mm) D / 5.6 lbs. (2.630835643 kg.) |
| Quick-Connect Universal CCU Interface |
| Connectors |
Power Connector: 5.5mm OD x 2.5mm ID
Power RJ-45: Supplies 36V to EZIM Slot Card
RS-232 IN RJ-45: Accepts RS-232 from ProductionVIEW or other non-daisy-chain control
systems
RS-232 OUT RJ-45: Passes RS-232 and Sync video feed to camera EZIM
Tally: 2-Pin Phoenix type spring cage connector
Video From Camera RJ-45: Accept differential video from EZIM Slot Card
Video Outputs:
HD-YPbPr on DE-15-F connector
HDMI on HDMI-F connector
HD-SDI on Edge Mount Carrier Class, Gold BNC-F (supports 3Gb/s Single Link 1080p/60 HD-SDI) |
| Video Support |
The Quick-Connect Universal CCU supports resolutions with frame rates of above 50 Hz (60, 59.94 and 50). Consequently, the 30, 29.97 and 25 frame rates from the Vaddio cameras are not supported. |
| Camera Settings Switch |
All switches should be in the down position for default.
Dip Switch 1: Put up to allow Scene A to load upon start-up or boot up.
Dip Switch 5: Put up to access LCD Display Menu settings including Display Mode (Negative Mode-Default or Positive Mode), Bias (Brightness) and Contrast.
Dip Switches 2, 3, 4, 6, 7 & 8: NA for HD-20, HD-19 and HD-18 |
| Video Adjustments |
Y-Gain (luminance gain) for fine tuning over longer cable distances
Skew for distance compensation: |
| CAT-5/5e/6 Cable Maximum Distance |
Up to 500’ (152.4m) |
| Power Supply |
36 VDC, 2.78 Amp |
| Dimensions |
1-RU Rack Mount - 1.72” H x 18.93” W x 7” D (43.7mm x 480.1mm x 177.8mm)
Rack Ears Included |