| Model: 999-6986-000 Specifications |
| Description |
ClearVIEW HD-20SE QDVI System, Black |
| Image Sensor |
1/2.8-Type Exmor, high-speed, low-noise CMOS Image Sensor
2.38 Megapixels: (2.14M effective pixels). |
| Zoom |
20X Optical Zoom with Multi-element Glass Lens |
| Field of View |
Horizontal: 63º Wide End to 3.47º Tele End, (16:9 Aspect Ratio)
Vertical: 36.8˚ Wide End to 1.85˚ Tele End |
| Lens Focal Length |
f=4.44mm to 89mm / F1.6 - F3.4 |
| Minimum Illumination |
Color: 0.3 Lux (F1.6, 1/30 sec, 50 IRE), B/W: 0.03 Lux (F1.6, 1/30 sec, 50 IRE) |
| Video Resolutions |
HD: 1080p/60/59.94/50./30/25, 1080i60/59.94/50 and 720p/60/59.94/50
HD Video Resolutions Only at 16:9 |
| White Balance |
Auto, Manual (Red and Blue Gain), OPWB, Indoor, Outdoor and Fluorescent |
| Video Output Formats |
HDMI, Analog Component, HSDS (Differential Video, Power and Control for Quick-Connects) |
| Signal to Noise Ratio |
Greater than 50 dB (AGC: Off) |
| Compatible Quick-Connects |
Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and Quick-Connect Universal CCU |
| Pan Range |
Pan: +170 degrees to -170 degrees, Tilt: +90 degrees to -30 degrees |
| Preset Positions |
16 (internal), 6 recalled via IR Remote |
| Control Methods |
RS-232, IR Remote Commander and OSD (on screen display) |
| Tally Ligh |
t Available through RS-232 Control |
| HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
| Camera Settings |
10-Position Dip Switch: Settings for IR Select, Baud Rate 9600, Image Flip and Color Space |
| Accessory Slot Cards |
HD-SDI Slot Card, Part Number 998-6900-007 (3Gb/s Single Link)
EZIM CCU Slot Card, Part Number 998-6900-006 |
| Dimensions/Weight |
7.81” (198.37mm) H x 6.67” (169.42mm) W x 7.057” (179.25. mm) D / 5.6 lbs. (2.630835643 kg.) |
| Quick-Connect DVI/HDMI-SR Interface |
| Connectors |
Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
Video Output: DE-15 connector for HD Analog Component (Y,PB,PR) video only (No SD Support)
IR Output: Transmits modulated or non-modulated IR signals received from the HD-19 IR receiver
Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter cable (using the Recessed Color Space Conversion Switch) , DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr |
| Cat-5 Cable Distance |
Up to 100’ (30.5m) |
| Power Supply |
24 VDC, 2.0 Amp Switching Power Supply |
| Dimensions / Weight |
1.6” (40.64mm ) H x 8” (203.2mm) W x 6.751” (171.45mm) D, ½-Rack Size / 1.21 lbs. (0.548846804 kg) |
| Accessory Options |
1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003
1m (3.3’) DVI-D Male to HDMI Male P/N: 440-5643-001
3m (10’) DVI-D Male to HDMI Male P/N: 440-5643-003 |