| Model: 999-6930-200 Specifications |
| Description |
ZoomSHOT 30 QDVI System |
| ZoomSHOT 30 Camera Specifications |
| Image Sensor |
1/2.8 Exmor CMOS 2.14 Megapixel (2.38 Total MP) |
| Video Output Resolutions |
HD: 1080/60/59.94/50/30/25, 1080i/60/59.94/50, 720p/60/59.94/50 |
| Lens/ Focus |
30x Optical Zoom / Auto and Manual focus options |
| Horizontal Viewing Angle |
63.0° Wide End to 3.47° Tele End |
| Video S/N Ratio |
>50 dB |
| Minimum Illumination |
0.4 Lux (F1.4) |
| Serial Control Protocol |
RS-232 Serial Control |
| Manual Pan/Tilt Range |
Pan: Limited to service loop of cabling, yoke and base are mechanical only
Tilt: ± 30°
Invertible for Ceiling Mount |
| Preset Positions |
12 |
| Tally Light |
Red LED available through RS-232 Control |
| Camera Connectors |
Two (2) RJ-45 Jacks:
EZ-Power VIDEO RJ-45 Jack for use with Quick-Connect - Supplies power to the camera
and returns differential HD video from the camera
RS-232 RJ-45 Jack (Serial Communication) |
| HD Video Select |
16-Position Rotary Switch: Used to set HD Video Resolution Output |
| Camera Settings |
6-Position Dip Switch: For IR Freq., Image Flip, Firmware Update Mode & Factory Reset
16-Position Rotary Switch for Output Resolution Settings |
| Thin Profile Wall Mount |
535-2000-237 (included) Black powder coating, sized to fit on 1-gang wall box or with supplied drywall fasteners |
| User Controls |
IR SHOT Commander and RS-232 for control; on-screen display (OSD) for configuration |
| Materials & Weight |
Aluminum & Steel, Weight = 2.75 lbs. |
| Dimensions |
Tube: 3” Diameter x 4.75” Long
Base: 5.5” Diameter
Overall Height: 5.5” Tall |
| Quick-Connect USB DVI/HDMI-SR (QDVI) Interface Specifications |
| Quick-Connect System |
Quick-Connect DVI/HDMI-SR Interface (two Cat-5e) for distances up to 150’ (45.72m) HDMI or DVI-D and Analog Component YPbPr output with IR forwarding |
| Connectors |
Power Connector: 5.5mm OD, 2.5mm ID coaxial connector
RJ-45: Four (4) Control IN, Control OUT, Daisy Chain OUT, EZCamera Power Video Port
Video Output: DE-15 connector for HD Analog Component (Y,PB,PR) video only (No SD Support)
IR Output: Transmits modulated or non-modulated IR signals received from the HD-20 IR receiver
Video Outputs: DVI-D (Female - Single Link) or HDMI with adapter cable (using the Recessed Color Space Conversion Switch) , DE-15F (High Density D-Sub 15-Pin F) for HD YPbPr |
| Cat-5 Cable Distance |
Up to 150’ (45.72m) |
| Power Supply |
24 VDC, 2.0 Amp Switching Power Supply with AC Cord Set |
| Dimensions |
½-Rack Size, 1.6” H x 8” W x 6.751” D |
| Weight |
1.21 lbs. |
| Accessory Options |
1-RU Rack Mount Panel for two (2) units (side by side): P/N: 998-6000-003 |
| Operating Temperatures |
0°C to 40°C / 20% to 80% Relative Humidity |
| Warranty |
Two (2) year limited warranty |