Model: IRV-3435 Specifications |
Description |
VoiceLink plus handheld system |
VoiceLink Plus |
Receiver Input |
Infrared FM |
Modulation |
FM Wide-band |
Reception Frequencies |
Ch. A: 2.08 MHz |
Infrared Wavelength |
850 nm |
Tone Signal |
Ch. A: 32.768 KHz |
De-emphasis |
50 µs |
Frequency Response |
50 Hz, -13KHz, ± 3dB |
S/N Ratio |
›65 dB |
THD |
‹1% @1KHz |
Nominal Deviation |
± 10 KHz |
Maximum Deviation |
± 25 KHz |
External Sensor Input |
Two, RCA |
Aux Input |
3.5mm with Gain Control, Front Panel |
Output Power |
Two Amplifiers, 10 Watts ea. (RMS) / 20 Watts total (RMS) |
Output Impedance |
4Ω |
Output Connection |
One Four Pin Phoenix Connectors |
Power Supply |
12VDC / 0.6A / 7.2W |
Dimensions |
5" W x 1" H x 4 ½ " D |
Weight |
1 lbs. |
Enclosure |
ABS |
Handheld infrared microphone/transmitter (IRH-35) |
Transmission Carrier |
Infrared |
Transmission Frequencies |
2.08 MHz & 2.54 MHz |
2 Channel Switchable |
Field Switchable |
Transmitting Diodes |
Ten |
Modulation |
FM Wide-Band |
Pilotone Frequency |
32.768 KHz |
Peak Deviation |
± 25KHz |
Operating Range |
2500 Ft². 60 Ft. |
Power Switch (Slide) |
On/Off |
Battery Charge Level (LED) |
Green (Useable Charge), Red (Needs Charging) |
Battery Life |
Approx. 7 Hr./Charge |
Dimensions |
21/8" Dia. Head, 1 7/16" Dia. Body, 9 5/8" H |
Weight |
10.3 oz. w/ Battery |
Duracell NiMH batteries (BR-2AA) |
Type |
AA |
Rechargeable |
Yes |
Made from |
Nickel metal hydride |
Drop-in charger (BRC-50) |
Slots |
Two (2) |
Used for |
IRH-35 microphone/ transmitter |
Color |
Black |
Ceiling Dome Sensor (ICS-55) |
Operating Frequencies |
2.3mHz to 2.8mHz |
Receiving Diodes |
6 large lens diodes |
Coverage |
360 degree |
Range |
40-50' line of sight 2500 sq ft |
Mounting |
Clip-on "T" bar bracket |
Connection |
Female RCA on 7" cable |
Power ON Indicator |
Green LED |
Dimensions |
4 5/8" Dia x 1 3/8" H |
Weight |
7.4 ozs |
Ceiling Speaker (SP-628) |
Frequency Range |
80 Hz to 15 kHz, ± 6dB |
Power |
30 watts continuous |
Sensitivity |
89dB SPL (1W/1M) |
Impedance |
8Ω |
Crossover Frequency |
6 kHz |
Nominal Coverage |
90° x 90° |
LF Driver |
(5.25 in) Polymica / rubber |
Magnet |
10 oz |
HF Driver |
High efficient 1" domed tweeter, neodymium |
Enclosure Material |
Air Sealed Metal Backcan
Infinite Baffle |
Termination |
Screw terminals for secure speaker wire connection |
Mounting |
Three Quick-Mount Clamps |
Dimensions |
5.5" H x 8" Dia. |
Net Weight (ea) |
5 lbs. / 2 oz |
Shipping Weight (pr) |
10 lbs. / 9 oz |
Included Accessories |
Galvanized Steel Tile Bridge |
Wall mount Speaker (SP-2000) |
Frequency Range |
80 Hz to 15 kHz, ± 6dB |
Power |
30 watts continuous |
Sensitivity |
88 dB SPL |
Impedance |
8Ω |
Crossover Frequency |
6 kHz |
Nominal Coverage |
90° x 90° |
LF Driver |
(5.25 in) Polycarbonate / rubber |
HF Driver |
High efficient 1" Mylar domed tweeter |
Enclosure Material |
Structural reinforced ABS
enclosure with metal mesh grille |
Termination |
Spring terminal for secure |
Dimensions |
5.5 x 7.25 x 4.25 in |
Net Weight (ea) |
5 lbs. / 2 oz |
Shipping Weight (pr) |
10 lbs. / 9 oz |
Included Accessories |
Wall mount bracket |
Lay-in Ceiling Speaker (SP-628L) |
Frequency Range |
80 Hz to 15 kHz, ± 6dB |
Power |
30 watts continuous |
Sensitivity |
89 dB SPL (1W/1M) |
Impedance |
8Ω |
Crossover Frequency |
6 kHz |
Nominal Coverage |
90° x 90° |
LF Driver |
Polymica / rubber |
Magnet |
10 oz |
HF Driver |
High efficient 1" domed tweeter, neodynium |
Enclosure Material |
Air Sealed Metal Backcan
Infinite Baffle |
Termination |
Speaker wire connection |
Mounting |
1' x 2' Lay-in speaker assembly |
Dimensions |
5.5 x 7.25 x 4.25 in |
Net Weight (ea) |
5 lbs. / 2 oz |
Shipping Weight (pr) |
10 lbs. / 9 oz |
Included Accessories |
Wall mount bracket |