Freedom one lectern manually adjust the worksurface with a pneumatic-gas assisted spring

The Spectrum Industries 55355FMSTW Freedom One Sit-to-Stand Lectern has 3" twin-wheel casters installed for mobile use. It manually adjust the worksurface height from 3ft-4ft (with casters) with a pneumatic-gas assisted spring. Use the Freedom One Sit-to-Stand Lectern where worksurface height adjustment or ADA compliance is required and rack rail for equipment storage is required. The worksurface has a lift capacity of 38 lbs. The lectern worksurface is 3ft wide and 3ft deep with two cable holes with grommets and a surround. One rectangular equipment rack worksurface grommet provides cable access or the ability to mount an optional power module (cover included). An optional logo plate can be added to the audience side of the lectern for institution branding. The 55355FMSTW comes with fusion maple/silver (FMS) standard laminate/color combination and 10 years warranty of all defects in materials and workmanship.

 

Equipment rack has 36 rack units with 18 from the audience side and the presenter side

The Equipment Rack can be mounted on the left or the right. The worksurface is 2ft wide and 3ft deep. The worksurface has a cutout with included cover. An optional power module can be added to this cutout. The Equipment rack has 36 rack units with 18 rack units accessible from the audience side and the presenter side. The audience side has a locking door, and an optional locking door can be added to the presenter side. Other options can be added including rack-mount accessories (shelves, drawers, cooling fans, and others).

Constructed from 1.0625" thick NAUF (No Added Urea Formaldehyde) composite board

The worksurface are constructed from 1.0625" thick NAUF (No Added Urea Formaldehyde) composite board with .030" high-pressure laminate on one face and a balancing phenolic backer on the opposing face. The metal components consist of 16-gauge and 20-gauge steel. Its worksurface edges are covered with 3mm vinyl. All metal components are finished with a scratch-resistant powder coat epoxy. Each Freedom One Lectern and equipment rack ships assembled. Customer assembles casters or glides and attaches equipment rack to lectern if required.