Freedom one lectern's worksurface has a lift capacity of 38 lbs.

The Spectrum Industries 55355CHBG Freedom One Sit-to-Stand Lectern has glides installed for stationary use. Use the Freedom One Sit-to-Stand Lectern where worksurface height adjustment or ADA compliance is required and rack rail for equipment storage is required. The worksurface has a lift capacity of 38 lbs. The lectern worksurface is 3ft wide and 3ft deep with two cable holes with grommets and a surround. An optional logo plate can be added to the audience side of the lectern for institution branding. The 55355CHBG comes with wild cherry/black (CHB) standard laminate/color combination and 10 years warranty of all defects in materials and workmanship.

 

Equipment rack has 36 rack units with 18 rack units accessible

The Equipment Rack can be mounted on the left or the right. The worksurface is 21" wide and 30" deep. The worksurface has a cutout with included cover. An optional power module can be added to this cutout. The Equipment rack has 36 rack units with 18 rack units accessible from the audience side and the presenter sides. The audience side has a locking door, and an optional locking door can be added to the presenter side. Other options can be added including rack-mount accessories (shelves, drawers, cooling fans, and others).

Lectern's worksurface are constructed from 1.0625" thick NAUF composite board

The worksurface are constructed from 1.0625" thick NAUF (No Added Urea Formaldehyde) composite board with .030" high-pressure laminate on one face and a balancing phenolic backer on the opposing face. The metal components consist of 16-gauge and 20-gauge steel. Its worksurface edges are covered with 3mm vinyl. All metal components are finished with a scratch-resistant powder coat epoxy. Each Freedom One Lectern and equipment rack ships assembled. Customer assembles casters or glides and attaches equipment rack to lectern if required.