| Projector Retrofit Kit |
| Display type |
True WXGA 1200 × 800 projector |
| 3D technology |
3D-ready projector using DLP® Link™ technology |
| Display technology |
The projection engine uses DLP® technology by Texas Instruments™, providing BrilliantColor™ performance and quality Gamma 2.2 correction with Bright Room, Dark Room, sRGB, User and SMART Presentation modes. |
| Brightness |
Estimated at 2000 lumens (typical) at a CCT of 6500 K by the IEC method |
| Lamp life |
3000 hours (Standard 200 W mode) or 5000 hours (Economy 160 W mode) |
| Aspect ratio |
4:3 native, with support for 16:9, 16:10 and 5:4 ratios |
| Contrast ratio |
2000:1 |
| Video system compatibility |
NTSC, NTSC 4.43, PAL, PAL-N, PAL-M, SECAM |
| Video interface compatibility |
Composite, S-video, and VESA RGB, with additional interface support for Component YPbPr and Component YCbCR inputs with the proper adapters (not included) |
| Video format compatibility |
Native 4:3 aspect ratio XGA projector resolution. With scaling, supports VGA, SVGA, SXGA, Quad VGA, SXGA+ and UXGA formats. |
| Synchronization |
Auto image synchronization (auto tracking, frequency, position adjustment, source detect and phase detect) |
| Mounting hardware |
Includes hardware for mounting the SMART UF65 projector to framed and solid walls. Includes a safety tether and limit strap. |
| Input/output connections |
Two HD DB15F connectors – RGB video input from two computers via VGA connectors
HD DB15F connector – video output pass-through of Video Input 1 signa
4-pin mini-DIN connector – S-video input
One pair of audio jacks (RCA, stereo) – reserved for use with S-video
Composite video connector – RCA-style video input
One pair of audio jacks (RCA, stereo) – reserved for use with composite video
Two 3.5 mm stereo jacks – audio input from two computers
3.5 mm stereo jack – audio output to connect speakers
RJ45 – network connection for SNMP management and control, and for sending e-mail alerts
4-pin power mini-DIN 5V 2A connector (reserved for ECP harness cable)
7-pin mini-DIN connector (reserved for ECP harness cable) |
| Projector fan |
Standard speed – 0 to 6000' (0 m to 1829 m): 41°F to 95°F (5°C to 35°C)
High speed – 6000' to 6800' (1829 m to 2073 m): 41°F to 86°F (5°C to 30°C) |
| Projector noise |
36 dBA (high fan speed) or 31dBA (standard fan speed), measured using JIS method |
| Power requirements |
100V AC to 240V AC, at 50 Hz to 60 Hz |
| Power cable |
Includes a 14' 9" (4.5 m) power cable |
| External control |
The RS-232 connector is configured to accept control codes from your computer or a room control system. |
| Power consumption |
270 W in High Brightness. 225 W in Economy mode. <5 W in Standby mode. |
| Remote control |
Provides an alternative method of controlling the SMART UF65 projector settings |
| Theft protection |
The SMART UF65 projector system features an optional padlocked ring to prevent theft. A Kensington security slot is provided to affix the system to a wall as a visual and physical theft deterrent. |