Description |
SMART kapp iQ 75" Capture Board |
Touch technology |
DViT® (Digital Vision Touch) technology |
Multitouch capabilities |
8 touches2 |
Object awareness |
Behavior adjusts automatically to the tool or object you’re using, whether it’s a pen, finger, eraser or palm. |
Pen ID™ |
Two people can write independently and simultaneously, using different colored ink. |
Type |
LED |
Aspect ratio |
16:9 |
Optimal resolution |
3840 × 2160 at 30 Hz (HDMI®) or 60 Hz (DisplayPort) |
Horizontal frequency |
122–140 kHz (typically 135 kHz) |
Vertical frequency |
47–63 Hz (typically 60 Hz) |
Contrast ratio (typical) |
5000:1 |
Brightness (maximum) |
360 cd/m² |
Pixel dimensions |
0.429 mm × 0.429 mm |
Gamut |
72% of NTSC |
Viewing angle |
178° |
Response time (typical) |
8 ms |
Presence detection |
Presence detection sensor on the bottom frame |
Audio |
10 W integrated speakers (×2) |
Noise level |
<35 dBA |
Included cables and accessories |
SMART kapp iQ appliance
8' (2.4 m) country-specific power cable
Pen (x2) |
Wireless technology |
Bluetooth 4.0 dual mode (backwards compatible with Bluetooth 2.1 + EDR) |
Capture options |
Establish a Bluetooth wireless connection with a supported mobile device (see below) by scanning the interactive display’s unique QR code |
Supported languages |
French
German
Italian
Japanese
Korean
Norwegian
Simplified Chinese
Spanish
Swedish
Traditional Chinese |
Mounting holes |
For a standard VESA® 600 mm × 400 mm mounting plate. Lower mounting holes 13 3/4" (35 cm) from the bottom of the interactive flat panel |
Mounting bracket depth |
Minimum depth of 1 5/8" (4.2 cm) for all components on the back of the interactive display to clear the wall |
Side |
Connector panel
OPS slot (for the iQ appliance)
HDMI1 input connectors
HDMI in
USB Type-B
HDMI2 input connectors
HDMI in
USB Type-B
DisplayPort input connectors
DisplayPort in
USB-Type-B
Stereo 3.5 mm out
RS-232 in |
SMART kapp iQ appliance
USB 3.0 Type-A (×2)
USB 2.0 Type-B3
OPS/HDMI input connectors
HDMI in
USB Type-B
HDCP encrypted HDMI 1.4 out
RJ45 |
Bottom |
USB 2.0 Type-A |
Back |
AC power inlet |
Board |
See the SMART kapp iQ boards administrator’s guide |
Apple devices |
iOS 9 or later operating system software
50 MB of storage
iPhone 4S or later
Third-generation iPad or later
First-generation iPad mini or later
Fifth-generation iPod touch or later |
Android™ devices |
Android 4.4.4 (KitKat) or later operating system
50 MB of storage (internal or SD card)
1024 MB of RAM
720p or better screen resolution
Bluetooth 2.1 + EDR
3 megapixel or better rear-facing camera (recommended) |
Mobile |
Safari for iOS 9 or later operating system software
Chrome™ for Android 39.0.2171.93 or later |
Desktop |
Internet Explorer® 10 or later
Chrome 39.0.2171.95 or later
Firefox® 34.0.5 or later
Safari 8.0 or later |
General requirements |
See the SMART Notebook software release notes |
4K UHD |
Graphics card that can support 3840 × 2160 resolution at 30 Hz and that has 1 GB DDR 5 memory, See Minimum requirements for Ultra High Definition or 4K on your interactive flat panel |
General requirements |
See the SMART Notebook software release notes |
Dimensions |
Smaller than 10" × 10" × 2" (25.4 cm × 25.4 cm × 5.1 cm) |
Weight |
Less than 10 lb. (4.5 kg) |
Mounting VESA |
75 mm × 75 mm or 100 mm × 100 mm mounting pattern |
HDMI |
Maximum length: 23' (7m)
NOTES
Use only certified HDMI cables that have been tested to support the performance standard you require.
The performance of cables longer than 23' (7 m) is highly dependent on the cable’s quality. |
DisplayPort |
DisplayPort 1.2 compliant or better, Maximum length: 23' (7 m) |
USB |
Maximum length: 16' (5 m) |
Important |
Using cables that exceed these maximum lengths can produce unexpected results, such as degraded picture quality or USB connectivity. Refer to SMART installation standards (smarttech.com/kb/171035) for comprehensive information about cables and extensions for SMART hardware products. |
Power requirements connectivity |
100V to 240V AC, 50 Hz to 60 Hz |
Standby mode |
19 W |
Normal operating |
190 W |
Maximum operating |
315 W |
Standby mode |
<2 W |
Normal operating (out-of-box) |
<131 W |
Operating temperature |
41–95°F (5–35°C) |
Storage temperature |
-4–140°F (-20–60°C) |
Humidity |
5–80% relative humidity, non-condensing |
Regulatory certification |
UL (U.S./Canada), FCC, IC, EMC, LV, VCCI, PSE, KC Mark |
European Union |
REACH, RoHS, WEEE and Packaging |
U.S. |
Packaging and Conflict Minerals |
Weight |
185 lb. (84 kg) |
Shipping dimensions (including pallet) |
75 3/8" × 54 3/8" × 14" (191.6 cm × 138 cm × 35.5 cm) |
Shipping weight |
238 lb. (108 kg) |
Warranty |
Two-year limited equipment warranty |