Model: AMP3IC6 Specifications |
Type |
Amplified Speaker |
Frequency Response |
50 Hz to 15 kHz. HF is optimized to enhance frequency response of the speaker |
Total Harmonic Distortion(THD) |
<.1% |
Input Configuration |
Differential (noise reducing) |
Minimum Common Mode Rejection |
40 dB |
Maximum Power Output |
25 watts |
At load impedance |
4 Ohms (2 speakers in parallel or 4 speakers in series parallel) |
Maximum current protected |
Yes |
Short Circuit protected |
Yes |
One wire to ground protected |
Yes |
Minimum Load Impedance |
3.2 Ohms |
Input Load Impedance |
10K Ohms |
Maximum number of Amplifiers on one line |
50 |
Power supply |
15 Volts DC |
Inputs |
3 Balanced Line |
Outputs |
1 Balanced Line, 1 - 25 watt speaker |
Controls |
3 Input level Controls, 1 Line out level Control, 1 Amplifier Master Gain Control |
Outputs |
4 Output Jacks allowing automatic correct wiring for series |
Heat sink |
An oversize heat-sink is provided |
High Voltage |
The highest voltage on the PCB is 15 volts |
Protection |
The amplifier is protected against short and overheating |
Plastic |
Fire rated V-0 |
Available Backcan |
UL Listed and Plenum rated, OWI Part# Backcan (Sold Separately) |
Available Tile Bridge (Support Truss) |
OWI Part # 6TB (Sold Separately) |
Combination Program Available |
Speakers and Accessories Combination Program |
Gift Box Dimension(L x W x H) |
14" x 10" x 6" |
Gift Box Weight |
5.5 lbs. |
Master Carton Dimensions (L x W x H) |
14" x 10" x 6" |
Master Carton Quantity |
1 |
Warranty |
1 year |