A text box is an element that displays typed text on a Capture page.

I found this helpful (1)

Inaccurate? (0)

Answered by Anonymous

Annotations are lines that are drawn on a Capture Page using the interactive Marker Pen, or the Highlighter or Pen from the Capture Annotation Toolbar. *Once drawn, a line becomes an element that can be moved, rotated, resized or regrouped. *Annotation lines are automatically grouped with other lines based on how closely the annotations are drawn together and the elapsed time between the drawing of the lines. (Autogrouping can be turned on/off by selecting Edit > Options > Preferences.)

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Yes, the Ebeam Edge was listed in the District Administration magazine as a 2012 Readers'' Choice Top 100 Product.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If you have a question that hasn''t been answered, our support team can help you get the answers you need. Please have the following information ready before you call: *The (hardware) product''s serial number and model number *The software version (e.g. Interact 2.3.3 or Workspace 1.0.2) *Your computer''s operating system and version (e.g. Windows XP SP3 or Mac OS X 10.6.4) *A brief description of the problem and any steps that you have already taken to try and resolve the problem *A brief description of any recent changes to your environment (e.g. a new computer, new lighting or motion detectors) Contact Info Phone: Toll free 1.888.99EBEAM (U.S. and Canada) or +1.650.413.7550 Monday-Friday, 9am - 5pm PST Online: Click HERE to fill out an online request form for technical assistance.

I found this helpful (0)

Inaccurate? (1)

Answered by Anonymous

The Recorder Tool Palette menu allows you to select the size of the area you want to record. From right to left, the options are: *Record Entire Screen: The Recorder captures everything shown in your primary monitor. *Record Selected Area: you will be prompted to drag your mouse to select an area of the primary monitor to record. *Record Window: You will be prompted to drag cross hairs from a dialog box to the application that you wish to record. If you drop the cross hairs on the Capture window, only the Capture page will be recorded.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Selecting Edit > Options > Software Updates Tab from Capture will allow you to determine the current software version you''re working with as well as to check for a new version. The top area of the tab describes your current software status, including the version number and the date the software version was last checked. The lower area of the tab allows you to specify a schedule for periodically checking for a newer version of software. The schedule options that are available are: *Every time the application is started *Every specified number of days *Never Select the Check Now button to check your version and display its status in the top area of the Software Updates Tab. Select the Software Updates Website button to go directly to the downloads web page and download the latest software.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If your text box color isn''t showing, make sure that the "Transparent" checkbox is unchecked in the text box outline and fill color dialog boxes.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If your computer is slow while running the Recorder, it could be due to either your computer''s processor or the amount of available RAM. To fix this make sure that any unnecessary background applications are shut and reduce the frame rate of your recording (frame rate can be changed in Recorder Options). The recommended frame rate for your computer is listed below: *100 MB Available Memory - Set frame rate to 4 frames/second *250 MB Available Memory - Set frame rate to 10 frames/second *500 MB Available Memory - Set frame rate to 15 frames/second

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

Sometimes signals from motion sensors or fluorescent lighting can interfere with the signal traveling from the Marker Pens to the receiver. This can make it appear that the pen is skipping or that there are areas of the whiteboard that the system cannot capture. Additionally if the pens are not working or if you block the transmitters on the pen with your fingers, you may see skips or dead spots. If you are still receiving dead spots, make sure: *Your Marker Pen is working properly. You will hear a low buzzing sound whenever you draw on the whiteboard if the pen is working properly. *You are not holding the Marker Pen too closely to the tip. Doing so can block the signal. *All parts of the receiver are connected to the receiver. If the receiver has somehow been dropped or broken and any part has detached, the way the signal is captured can be affected. *There is nothing obstructing the Marker Pen from the receiver. Move any obstructions out of the way and try to draw again. *There are no lights shining directly into the receiver (including sunlight). If there is, block the light and try to draw again. *There is no automatic lighting or motion sensors. Temporarily disable the lighting sensor and disable the motion sensor and try to draw again.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If you are attempting to share a meeting, make sure: *An interactive receiver is detected. *You are connected to the Internet. *If your network / Internet connection is behind a firewall or proxy server, you have set up the proxy server.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

In order to calibrate the software, make sure your hardware is set up properly and is recognized by the software. If your whiteboard has not been calibrated before, a calibration window will automatically open. To calibrate, tap the Marker Pens on the board as directed by the software. To manually start the calibration: *Select Yes when prompted, or *Select Calibrate Capture Area from the Capture Tools Menu.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

In order to add audio to you recording, make sure that you have checked "Include Audio Track". If you are using a microphone, the software will search for an attached microphone and will automatically check this checkbox if it finds one.

I found this helpful (1)

Inaccurate? (0)

Answered by Anonymous

If the color of your dry erase marker does not match the color being show in the software: *Make sure the color on the Marker Pen matches the color of the dry erase marker. *Check the color set for the Marker Pen in the Sleeve Settings. It is possible to set a different color in the software for any Marker Pen.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If audio recording is enabled, a speaker will be shown. If it is disabled, the speaker is not shown.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If the software isn''t showing what you are writing on the whiteboard, make sure: *Your hardware is properly connected to your computer and detected by the software. Verify that the Hardware Status Icon located on the Capture Toolbar is not grayed out. If the icon is grayed out, your hardware is not properly connected to the software. *Your Marker Pen is working properly. You will hear a low buzzing sound whenever you draw on the whiteboard if the pen is working properly. *You are not holding the Marker Pen too closely to the tip. Doing so can block the signal. *You are on the Active Page. It is possible to be drawing on the Active Page while viewing a different page in the Capture file. The Active Page is marked with a small pen icon.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

No, meeting participants will only see the Capture meeting file you are sharing during a shared meeting.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous