Model: LS2 Specifications |
Description |
Line Source Screen Channel Loudspeaker |
System type |
Four-way, bi-amp, ported enclosure |
Driver components |
HF: 6" and 3" high output ribbon drivers with Kapton diaphragm and Neodymium magnets
MF: 6.5" paper/Kevlar high efficiency midrange cone driver with Neodymium magnet and 51mm voice coil
LF: 2 x 15" paper composite cone drivers with 100mm diameter voice coil |
Crossover |
LF-MF: 350Hz, active via processor
MF-HF: passive @ 2.0kHz
Two-way HF section with frequency shading network |
Frequency response 1 |
30Hz-20kHz @ -6dB |
Maximum SPL 2 |
LF: 129dB continuous, 142dB peak
MF-HF: 125.5dB continuous, 138dB peak
LS2 system: 131dB continuous, 143dB peak |
System coverage 3 |
100° horizontal dispersion
40° vertical dispersion |
Sensitivity 1 , 1W/1m |
LF: 98dB
MF-HF: 102.5dB |
Power handling capacity 2 |
LF: 1200W continuous, 3000W (IEC) short term
MF-HF: 200W continuous, 400W (IEC) short term |
Recommended amplifier power |
LF: 850-1500W @ 8 ohms
MF-HF: 350-450W @ 8 ohms |
Rated impedance |
LF: 4 ohms
MF-HF: 8 ohms |
Input connectors |
4 position terminal barrier strip, separate LF and MF-HF inputs |
Enclosure |
Ported enclosure with system tuning at Fb=28Hz
18mm marine plywood, heavily braced for maximum structural strength and minimum panel resonance
Rotatable MF-HF section in acoustically isolated enclosure allows for vertical or horizontal placement of cabinet
Multiple M10 integrated fly points
Rated for overhead installation with 5:1 safety ratio |
Mounting options |
Free standing with or without floor brackets
Flying via 16 x M10 integrated points |
Accessories |
145-178107-01: BKT-LSX Tilt bracket for LSx loudspeakers. Platform mountable tilt bracket (±7 degrees) set for screen channel installation (included in the box)
111-685201-01: Allen Products RK-4C Rigging Kit 4 x cables for flying |
Dimensions |
(LxWxH) 15.8 x 27.2 x 59.0" (400 x 692 x1498mm) |
Net weight |
160.8lbs (73kg) |
Warranty |
Limited 5-year warranty |