Model: 123-003104-03 Specifications |
Description |
MicroTiles Display Wall System |
Model numbers |
- Display unit: D100
- Screen: S300 or S310
- External control unit (ECU): E100
|
Display unit dimensions |
- Height: 306mm (12.05")
- Width: 408mm (16.06")
- Depth: 260mm (10.24")
- Weight: 9.2kg (20.3lbs) (including screen)
|
External control unit (ECU) dimensions |
- Height: 50mm (1.97")
- Width: 259mm (10.20")
- Depth: 191mm (7.52")
- Weight: 1.6kg (3.5lbs)
|
Display specifications |
- Screen size (diagonal): 510mm (20")
- Native resolution per tile: 720 x 540
- Pixel pitch: 0.567 x 0.567mm
- LED lifespan (50% brightness): 65,000 hours
- Peak white color temperature: 6500K
- Color temperature: 3200-9600K
- Adjustable gamma: Yes
- Color space (CIE 1931): 115%
- Optical system: DLP® 0.55" SVGA
|
Screen specifications |
S300
- Maximum calibrated brightness1: 600 nits (cd/m2)
- Screen gap (typical): 1.3mm at 25°C (77°F)
- Operating temperature: 5°C (41°F) min, 40°C (104°F) max
- Operating relative humidity: 35-80% non-condensing
- Shipping (boxed) temperature: -20°C (-4°F) min, 50°C (122°F) max
S310
- Maximum calibrated brightness1: 600 nits (cd/m2)
- Screen gap (typical): 0.7mm at 25°C (77°F)
- Operating temperature: 5°C (41°F) min, 35°C (104°F) max
- Operating relative humidity: 35-80% non-condensing
- Shipping (boxed) temperature: -20°C (-4°F) min, 50°C (122°F) max
|
Processing and control |
- Input signal compatibility: Single-link DVI-D (HDCP)
- Processor bit rate: 165M pixels per second
- Data link bit rate: 5Gbps
- Color processing: 13 bits
- Refresh rate: 47-63Hz frame-locked
- Control interface: Ethernet with SNMP support, Serial
|
Power |
- Input rating:
- Display unit: 100-240V AC, 50/60Hz, 1.3A-0.54A
- ECU: 100-240V AC, 50/60Hz, 0.20A
- Power consumption per tile: 70W typical, 16W in standby, 110W design limit
- Power consumption per ECU: 8.5W typical
- Heat load per tile: 239 BTUs/hr typical, 375 BTUs/hr design limit
|
Operating specifications |
- Clearance for ventilation (rear): 50mm (2") minimum
- Vibration/motion limit: 0.5G
- Noise level per tile at full brightness: 35dB at 25°C (77°F) ambient
- Run time: 24/7
|
Accessories |
- Mounting brackets for each tile above 5 high
- Base feet for levelling the bottom row
- Rear air filter
|
Regulatory approvals |
- Directives (EC) 2002/95/EC (RoHS) • 2002/96/EC (WEEE) • Regulation (EC) No. 1907/2006 (REACH)
- CAN/CSA C22.2 No. 60950-1-03 2nd Edition • UL 60950-1, 2nd Edition • IEC 60950-1:2001, 2nd Edition
- FCC, Part 15, Subpart B, Class A • EN55022/CISPR22 Class A • EN55024 / CISPR24 • CE (EU)
- GoST-R (Russia) • KC/KCC (Korea) • PSE (Japan) • C-Tick (Australia & New Zealand) • Singapore • Dubai • CCC (China) • South Africa
|
Limited warranty |
- 3 years parts and labor
- Contact an authorized Christie representative for full details of our limited warranty
|
Note |
Under recommended (typical) operating conditions, brightness/color matching is enabled across the canvas. However, if brightness and color matching is disabled, higher brightness and power levels are achievable; up to 110 watts per tile. When designing a cooling or electrical system, this maximum design limit of 110W (375 BTUs/hr) should be used to ensure a reasonable safety factor. Refer to the Christie MicroTiles Specification and Application Guide, available on christiedigital.com, for more details.
Due to constant research, specifications and features are subject to change without notice. |