The Bretford ECILS1FF-BK mobile cart has enough room for a data projector and presentation materials on the top shelf and a notebook computer with mouse on middle pull out shelf. The top and bottom shelves both made from 18-gauge steel and measure 32"w x 24"d. Corners of the shelf open so the sides of the shelf do not connect. The legs of the projector cart fit flush to the shelf and attach with a “W” bracket design that interlocks the legs and shelves for maximum strength and stability. Each corner has a 13-gauge steel “W” mounting bracket with 1⁄4" square head bolts and hex nuts that hold leg securely to table.
 
Legs are 18-gauge, 1" square tubular steel 37-1⁄4" long. Each leg has a hard plastic caster insert mounted in the bottom of the tube. Projector cart has one (1) 29"w x 13"d, 18-gauge steel pull-out notebook computer shelf. Notebook computer shelf may be set at seated 25", 27" or 29" height or standing 33-1/2", 35-1/2" or 37-1/2" height at time of assembly. One (1) 18-gauge steel cord organizer bin of dimensions 30"w x 10"h x 5"d overall attaches between the rear legs of the cart. Cord bin has four (4) 5" x 1/4" slots at the top of the back panel and two (2) slots of the same dimensions, one down each side.
 
The ECILS1FF-BK cart includes an overload protected 6-outlet electrical assembly with on/off switch and 20' 3-wire cord and two (2) machine screws with nuts for attaching unit to the cord management bin. Stem casters are mar resistant, hard black rubber, 4" in diameter. Each caster assembly has ball bearing swivel capabilities, steel construction and is load rated for 115 lbs each.  Two casters have locking brakes. The ECILS1FF-BK is finished in black power paint.
 
The ECILS1FF-BK cart is constructed using “prime” steel which has a 25% to 35% post-consumer recycled content and is recyclable at the end of the product life cycle. It is certified to GREENGUARD children & schools indoor air quality standards. Made in USA!