MooreCo Balt Height Adjustable Sit/Stand Flipper Table
Height Adjustable Sit-Stand Flipper Table
Sit-to-stand tables for any space and any age. The Height Adjustable Flipper Table features a flexible adjustment range to accommodate virtually any function.
Tables adjust from 28-1/2" to 45" high, designed to allow easy viewing with stadium style seating in larger training room environments. Tables can be used with chairs, stools, or while standing.
Each features a 1" thick HPL top available in multiple standard laminates or can be customized with any HPL and edge band.
Tops flip back with a simple one handed lever mechanism to allow for easy transport and nesting for compact storage.
The black powder-coated steel frame includes a stabilizing stretcher bar and 2" casters (two lockings). Optional modesty panel available for 60" and 72" tables.
Tested to support up to 300 lbs.
SCS Indoor Advantage Gold Certified.
OVERVIEW
The Height Adjustable Flipper Table easily accommodates a range of ages and sizes, can be transported with ease and can be nested for compact storage.
TOP
The top is made of a 1 1/8” Particleboard Core with a 3mm Flat Vinyl T-Mold Edge. The work surface is constructed of a 45# particleboard core with high pressure laminate (HPL) top surface and phenolic backer sheet for balanced construction. 1 1/8” 3mm flat vinyl t-mold is secured to the work surface with brad nails along the perimeter.
FRAME
The black powder-coated frame is made up of two legs and two cross bars. The two legs are made of two 14 Ga 3.15” x 1.6” oval steel tubes, one horizontal and one vertical, that are welded together and measure 22” and 21” long, respectively. The telescoping insert is a 14 Ga 2.6” x 1.2” oval steel tube and is welded to a 10 Ga steel 4.56” x 2.4” x 1.9” channel that holds the flipping mechanism and the table supports.. The table supports are tapered 14 ga 13.75” x 2.75” x 2.15” steel channels riveted to 20 Ga 5.5” x 2.5” steel plates and attached to the leg channels with two M6 x 12mm screws in a barrel plug and to the table tops with two M6 x 20mm screws each. The lower of the two crossbars is is 16 Ga 2” x 1” steel tube and is screwed through a formed metal cover into the 10 Ga 4.0” x 0.8” bent steel plates welded to the vertical leg tube with two M6 x 8mm screws on each side. The upper crossbar is directly underneath the table top and is a 16 Ga 1” square steel tube that mounts with a ‘T’ bracket to the table supports using two M6 x 8mm on each side. Plastic endcaps cover all open tubes. Fully assembled, the table can adjust from 28.5” to 45” using the four M6 x 20mm screws from the vertical leg tube into the leg insert.