MooreCo balt 204PG-T1 Projection Plus Board with Presidential Trim (4'H x 6'W)

The MooreCo balt 204PG-T1 Projection Plus Board with Presidential Trim (4'H x 6'W) is the ideal choice for a multipurpose audio/visual environment, serving as markerboard and projection surface in one. It offers a matte gray finish that gives 60% less glare than standard porcelain steel surfaces. A precisely balanced porcelain enamel ground coat is furnace-fused to both sides of 28 gauge (standard) or 24 gauge (custom) steel. The first furnace fuses a ground coat of enamel that is heat-softened at approximately 1450º F and the second furnace firing fuses a coat of enamel to the ground coat enamel.

The color fusion ceramic topcoat is applied to provide the desired surface color. A fade-resistant waterproof resin glue bonds the porcelain to an MDF core and foil backer. Galvanized steel backer is available for an up-charge. Custom sizes are available.

Damp erasing is required for optimum performance. Some ghosting may occur.

Projection plus technical information

• A precisely balanced porcelain enamel ground coat is furnace-fused to both sides of 28 gauge (standard) or 24 gauge (custom) steel.
• The first furnace fuses a ground coat of enamel that is heat-softened at approximately 1450º F. The second furnace firing fuses a coat of enamel to the ground coat enamel.
• Color Fusion ceramic topcoat is applied to provide the desired surface color. A fade-resistant waterproof resin glue bonds the porcelain to an MDF core and foil backer.
• Galvanized steel backer available at an upcharge.
• Custom sizes are available.