There are 3 EDID modes as below : - Default : Default ATEN EDID (720p / 2D / Stereo Audio) - Port 1 : Uses the EDID of the monitor connected to port 1 - EDID Learn : EDID Learning stores the EDID data of the local monitor and uses it as the default.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The error code is associated with the serial port connection, please verify the following: - Do you have an unused COM port available on your computer? - Are there any resources accessing the Com port? - Do you have an Antivirus that may be blocking use of the Serial port connection? -> You might have to disable or uninstall the antivirus for testing."

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

There are 2 GUIs available 1- The browser logon 2- An RS232 GUI* [Click on the attachment] *The RS232 GUI works with Windows only.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

No, the units are not compatible. They will not cascade

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

The VM0808H has a built-in bi-directional RS-232 serial interface allowing system control through a high-end controller. or the serial connection on a PC.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous

If your particular ATEN device supports "normal" RS232 ASCII commands, it should be able to support commands in Hex format as below: Example: Switch input 1 to output 7 ASCII: sw i01 o07 -->Transform ASCII command to Hex format: HEX: 0x73 0x77 0x20 0x69 0x30 0x31 0x20 0x6f 0x30 0x37 0x0d 0x0a In order to send the command you need to add CRLF characters (0x0d 0x0a) after each command.

I found this helpful (0)

Inaccurate? (0)

Answered by Anonymous