• Brightness output: 7200 lumens
• Resolution: 1,920x 1,200, WUXGA
• Superior color performance
• Easy to install
• Cinema level reliability

The Appotronics FU750A is a DLP high-performance projector that features a 1,920 x 1,200 (WUXGA) resolution and 7,200 lumens.

Superior Color Performance

Dynamic Light Control Enables 100,000:1 Contrast

Direct control over light source output from projector to achieve faster-responding speed

Color brightness is a key indicator to determine the performance of displays. Lower the color brightness, lower the color reproducing capability a projector will have under the same brightness. It provides an important standard for consumers to evaluate the color performance of their projectors.

The red ratio of most DLP laser projectors stays poorly at around 7%. Resulting in gloomy red color reproduction. Appotronics installation projectors have over 16% red ratio which exceeds TI’s standard color ratio recommendation.

Appotronics installation projectors maintain precise coverage of Rec 709 while yielding much higher color brightness compared to competitors.

Optional Lenses

5 optional lenses can adapt to all kinds of installation environments. All lenses have powered large-scale vertical and horizontal shifts.

Wide range of powered lens shift (Vertical +100%, Horizontal +40%). Powered lens shift/zoom/focus.

Advanced geometric correction enables projection onto spherical, cylindrical, and other non-flat surfaces.

3D-sync to support infrared 3D and DLP-Link 3D.

All-new lightweight design has cut the weight of the system for over 20 lbs.

Adjustable driver current on all color segments to insure color uniformity under white field under any grey level.

Advanced geometric correction enables projection onto spherical, cylindrical, and other non-flat surfaces.

The projector can be oriented in any position, 360° in both horizontal and vertical axes.

Rich array of input/output connection types, including HDMI, DVI, 5BNC, and others.

All-sealed light engine, dust-free structure.

The 1st 200001m DCI ALPD® cinema projector was put in service on July 10th, 2014, and has amassed more than 6 years of use since.

Compared to traditional projector lamps. ALPD® laser light source manufacture is completely heavy metal-free throughout the production process, with no wastewater and air pollution emitted.

Efficient control over the working temperature of the color wheel and motors provides higher stability and a longer life span.