Model: WIR TX90 DC WHT Specifications |
Description |
Large Area Multi-Channel Infrared Emitter (White Housing) |
System Includes |
(1) WIR TX90 DC Transmitter
(1) TFP 053 Power supply
(1) WCA 123 50’ DC power extension cable
(1) BKT 024 Wall/ceiling mount
(1) IDP 008 ADA wall plaque |
Dimensions, Weight |
11.25” W x 6.25” H x 2.125” D (28.6 cm x 15.9 cm x 5.4 cm), 1.8 lbs (0.8 kg) |
Color |
Black with white legends, black acrylic lens (optional white enclosure available) |
Power Supply |
Desktop-style, universal power supply.
Input: 100-240 VAC, 50/60 Hz, 0.6 A. Line cord specified by country of use.
Output: 24 VDC, 1.0 A, 25 W. Barrel connector.
50 ft DC power supply extension cable available (WCA 123). |
Modulation |
FM Wideband, +50 kHz deviation max., 50 uS pre-emphasis |
Carrier Frequency |
Channel A: Selectable, 2.3/3.3 MHz
Channel B: Selectable, 2.8/3.8 MHz |
Emitter IR Power |
3.5 W |
Coverage Area |
30,000 sq. ft. (2,787 sq. m) in single channel mode when using the RX22-4 Receiver
19,000 sq. ft (1,765 sq. m) in two channel mode when using the RX22-4 Receiver
11,000 sq. ft (1,022 sq. m) in four channel mode when using the RX22-4 Receiver
3,350 sq. ft (311 sq. m) in single channel mode when using the RX18 Receiver |
Signal-to-Noise Ratio |
>75 dB, +3 dB |
Frequency Response |
80 to 15,000 Hz, electrical response |
Total Harmonic Distortion |
Less than 0.2%, electrical response at 1 kHz |
Compression |
Music preset 1:1, Voice preset 1.5:1, Hearing Assist preset 2:1 |
Auto Carrier Shut-Off |
20 minute timer shuts off carrier when no audio is present |
Power Indicator |
Red LED |
Audio Volume Level Controls |
CH A and CH B Input Level, press to select, 28 dB adjustable range |
Audio Indicators |
CH A and CH B Audio Level, yellow LED, flash |
Carrier LEDs |
2 green LED carrier “on” indicators |
Phones Output |
3.5mm TRS headphone jack. CH A tip, CH B ring on jack, 32 ohm headphone (min) |
Application Preset |
Music, Voice, Hearing Assist. Frequency response; Music: Flat; Voice: Mid-range boost; Hearing Assist: High frequency boost |
Tone Control |
Press to select, 21 dB adjustable range (1 kHz between low boost/hi-cut and low cut/hi boost). |
Power Input |
24 VDC, 0.8 A, 25 W |
Audio Input Connector |
CH A and CH B, 3 wire Phoenix |
Input Level |
Balanced or unbalanced, 316 mVRMS (-10 dBV) nominal, 5.7 k Ω input impedance; max input (over volume range) -21 to +7 dBV. |
Baseband Output |
BNC, 50 Ω, for use with TX9 or TX9 DC only |
Baseband Cable |
RG 58 Coax, BNC connectors, maximum 1000 ft. (300 m) length |
Operating Requirements |
0-50º C (+32 °F to 122 °F) ambient temperature, non-condensing, non-corrosive atmosphere |
Mounting Kits |
Wall or Ceiling Mount: BKT 024 Omnidirectional mount;
Optional: Tripod Stands: SS-11 or SS-6 |
Warranty |
5 years on transmitter (90 days on accessories) |
Approvals |
CE, FCC, RoHS, WEEE |
Compatible Receivers |
WIR RX22-4 Four-Channel Receiver
WIR RX18 Two-Channel Receiver |
Notes |
Specifications: Single end input, volume & tone controls at mid point, 1 kHz, “Music” Preset |