| Model: WF SY5 PRO-4 D WAP Specifications |
| Description |
Wi-Fi Assistive Listening System with Dante Input, WAP/Router and 4 Wi-Fi Receivers |
| Dimensions |
8.45” W x 8.25” D x 1.72”H (21.5 cm x 21 cm x 4.4 cm) |
| Weight |
Transmitter: 3.0 lbs (1.36 kg) |
| Color |
Black/Silver with silver legends on the front, white legends on the back |
| Rack Mount |
Standard 19” Rack, one EIA rack space high, 1/2 space wide , 1–2 units can be mounted in a single rack space with optional RPK 005 (single) or RPK 006 (double) Rack Mount Kits |
| Power Supply |
Desktop Style Transformer (TFP 062); Input: 100-240 VAC, 50/60 Hz. IEC Line Cord; Output: 24 VDC, 750 mA, 18W. 2.5mm ID center positive barrel connector |
| Power ON Indicator |
Push On/Push Off latching power button, backlit green indicates power ON, backlight off indicates power OFF, fading from bright to dark indicates Sleep Mode. |
| Temperature Range |
Operating: +32° F to +104° F (0° C to 40° C); Storage: -4° F to +158° F (-20° C to 70° C) |
| User Interface |
Front panel buttons or hosted web interface |
| Audio Processor Functions |
DSP based; Compression: 1:1, 1.5:1 or 2:1; High-pass and Low-pass Filter Frequency control |
| Frequency Response |
31 – 16000 Hz, ±4B (“Music” Audio Preset) |
| Signal-to-Noise Ratio |
≥74 dB Transmitted RF |
| Total Harmonic Distortion |
Less than 0.25% @ 1 kHz (RF output) |
| Common Mode Rejection |
>57 dB @ 1 kHz, Mic or Line |
| Audio Inputs |
(1x) Combination 3-pin XLR, 1/4” (TRS) jack for Mic or Line Level Analog Audio, Balanced or Unbalanced Line Level, or balanced or unbalanced microphone with Selectable Phantom Power |
| Audio Input Gain Adjust |
In menu, adjustable to 0 to -50 dB, in 1dB steps |
| Phantom Power |
14.4 VDC applied through 2.2 kΩ resistors to analog combo jack: Pin 2 and Pin 3 on XLR jack, or tip and ring on 1/4” TRS jack |
| Audio Level Indicators |
10-LED array that reads -18 to +9 dB at 4B intervals. 7 Green, 2 Amber, and 1 red LED. Green LEDs indicate normal operating audio level peaks, Amber LEDS indicate close to overload peaks, Red LED indicates overload peaks |
| Headphone Output |
1/4” TRS stereo jack, mono signal, 15.7 mW, maximum in 33 Ω (level adjustable in menu 0 to -40 dB in 2 dB steps) |
| Line Output |
RCA jack (black), -10 dBV (.32 VRMS); Output impedance 100 Ω |
| Input Levels (Bal or Unbal) (at Audio Input Gain = 0dB) |
Nominal (1st Amber LED) / Overload Warning (Displayed on Screen) |
| Microphone |
-55 dBV (1.7 mV RMS) / -15 dBV (180 mV RMS) |
| Line |
-25 dBV (55 mV RMS) / +16 dBV (6.3 V RMS) |
| Ethernet |
RJ-45 on back of unit supports CAT 5e cable lengths up to 328 feet (100 meters); 10/100 Base-T IEEE 802.3 compliant, unique MAC address |
| Approvals |
FCC, RoHS3, WEEE, Industry Canada, CE, PSE, RCM, CB Scheme |
| Warranty |
2-year parts and labor |
| WF WR10 Specifications |
| Dimensions |
9.3” x 7” x 1.65” (236cm x 178cm x 42cm) |
| Weight |
1.8 lbs. (0.82 kg) |
| Standards Compliance |
2.4GHz: IEEE802.11n, IEEE802.11g, IEEE 802.11b;
5.xGHz: IEEE 802.11n, IEEE 802.11a; 802.11ac
IEEE802.3, IEEE802.3u, IEEE802.3ab |
| Interface |
One 10/100/1000M WAN Port (Auto MDI/MDIX); Four 10/100/1000M LAN Ports (Auto MDI/MDIX); One USB 3.0 Port |
| Antenna |
Four 5dBi Detachable Omni-Directional Antennas |
| Power |
Input: 12VDC @ 3A |
| Max Power Consumption |
35W |
| Wireless Speed |
2.4GHz: 1000Mbps; 5GHz: 2167Mbps |
| Frequency |
Concurrent 2.4GHz and 5GHz |
| Wireless Security |
WPA/WPA2-PSK, WPA/WPA2, AES |
| Warranty |
Three (3) year, parts and labor |
| Approvals |
CE, FCC, RoHS, IC, RCM |