| Model: IR Plus Secure Dante Specifications |
| Description |
IR Plus System |
| Catalog Number |
IR SY12 D |
| System Includes |
IR M1 D - IR Plus Dante
(2) IR E4 - IR Plus Emitter
IDP 008 - ADA Wall Plaque
IR RX20 - Infrared Receiver
CHG 520 - Charger for IR RX20
(2) NKL 001 - Mono Neckloop 18"
(4) BAT 026-2 - Two AA NiMH rechargeable batteries
MLB 003 - Linking Bar
(2) BKT 024 - Wall/ceiling mounting bracket |
| Model: IR M1 D Specifications |
| Dimensions |
19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm) |
| Weight |
5.2lb. (2.4 kg) |
| Color |
Black |
| Rack Mount |
Single Rack Unit |
| Power Supply |
International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output +48VDC, 0.75A center-positive |
| Power Switch |
Rocker switch with LED |
| Signal to Noise Ratio |
67 dB (typical) |
| Modulation |
FM Wideband, +50kHz deviation, 50uS pre-emphasis |
| Carrier Frequency |
Selectable, 2.3/2.8 or 3.3/3.8MHz |
| Frequency Response |
40 to 16,000Hz, +1 dB, -3dB, electrical response |
| Total Harmonic Distortion |
Less than 2%, electrical response |
| Audio Processor Functions |
DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
| Auto Carrier Shut-Off |
Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
| Infrared Test LED |
Dual IR LED for receiver testing, monitoring, and audio signal testing. |
| Audio Input |
(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
| Dante |
Optional |
| Internal Test Tone |
400 Hz internal test tone selectable as audio input source for setup and diagnostics |
| Remote Configuration |
Available through embedded website |
| Headphone Output |
(2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
| Emitter Output Jack |
Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
| Operating requirements |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
| Approvals |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
| Warranty |
2 years on Modulator, 90 days on accessories |
| Model: IR E4 Specifications |
| Dimensions |
7.5” (W) x 1.4” (H) x 3.6” (D)
(19.1 cm x 3.6 cm x 9.1 cm) |
| Weight |
0.8 lb (362 g) |
| Color |
Black |
| Power |
48 VDC supplied by IR M1 via CAT 5e cable. |
| Coverage Area |
Up to 18,000 square feet in single channel mode |
| Connectivity |
+48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
| Operating requirements |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
| Approvals |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
| Warranty |
2 years on Emitter; 90 days on accessories |
| Model: IDP 008 Specifications |
| Dimensions |
10-3/8″ (L) x 6-¼” (W) x 1/8″ (H) |
| Model: IR RX20 Specifications |
| Weight |
1.6 oz |
| Material and Color |
IR Transparent polycarbonate, black |
| Battery Type |
LiPo |
| Battery Life |
8 hours |
| Battery Charger |
CHG 520 |
| Operating Temp |
32-122° F (0-50° C) |
| Range |
Up to 15,000 sq. ft. in single channel mode with IR T2 transmitter |
| Operating Frequency |
2.3 MHz or 2.8 MHz or stereo |
| Frequency Response |
100 Hz to 12 kHz, ± 3 dB |
| Signal to Noise Ratio |
60 dB at 10 m |
| Controls |
Volume control thumbwheel;3-position selection switch (2.3 MHz, 2.8 MHz, stereo), Off/on slider for power |
| Acoustic Output |
120 dB MAX SSPL90 with 2 cc coupler |
| Compatibility |
Compatible with 2.3 MHz and 2.8 MHz IR transmitters |
| Headphone Jack |
3.5mm stereo |
| Ear pads |
EAR 089 |
| Approvals |
CE, RoHS, FCC, Canada, RCM, VCCI, WEEE |
| Warranty |
5 years (90 days on battery) |
| Model: CHG 520 Specifications |
| Dimensions |
12″L x 6.25″W x 1.5″H (30.48 cm x 15.875 cm x 3.81 cm) |
| Weight |
13.6 lbs |
| Color |
Black metal and plastic |
| Power Supply Input |
120 VAC |
| Power Supply |
100-240V / 12VDC TFP 043 |
| Unit Capacity |
5 Units |
| Indicators |
Individual Charging Indicators: Red LEDs |
| Warranty |
1 year (90 day warranty on cables and power supply) |
| Approvals |
WEEE, RoHS, CE, FCC, CANADA, RCM, VCCI |
| Model: BKT 024 Specifications |
| Base 1 |
2″ (50.8 mm) round base with four 0.188″ (4.8mm) holes on 1.6″ (40.6mm) bolt circle for solid surface mounting |
| Base 2 |
T-Bar Clip for drop ceiling rails |
| Base Cover |
Black Vinyl, covers either base |
| Shafts |
Two 0.5″ (12.7mm) diameter, 2″ (50.8mm long aluminum, black. 1/4-20 stud with lock ring. |
| Head |
190° Tilt, 360° Turn [&] 360° Rotation |
| Finished Lengths |
2″, 4″ or 6″ |
| Maximum Weight |
3 lbs (1.36 kg) |
| Shipping Weight |
0.3 lbs (166.5g) |