Model: IR Plus Flex Dante Specifications |
Description |
IR Plus System |
Catalog Number |
IR ME2 D |
System Includes |
IR M1 D - IR Plus Dante
(2) IR E4 - IR Plus Emitter
IDP 008 - ADA Wall Plaque
MLB 003 - Linking Bar |
Model: IR M1 D Specifications |
Dimensions |
19” (W) x 1.75” (H) x 8.2” (D) (48.3 cm x 4.5 cm x 20.8 cm) |
Weight |
5.2lb. (2.4 kg) |
Color |
Black |
Rack Mount |
Single Rack Unit |
Power Supply |
International Desktop Supply
Input: 36 W, 110-240 VAC 50-60 Hz
Output +48VDC, 0.75A center-positive |
Power Switch |
Rocker switch with LED |
Signal to Noise Ratio |
67 dB (typical) |
Modulation |
FM Wideband, +50kHz deviation, 50uS pre-emphasis |
Carrier Frequency |
Selectable, 2.3/2.8 or 3.3/3.8MHz |
Frequency Response |
40 to 16,000Hz, +1 dB, -3dB, electrical response |
Total Harmonic Distortion |
Less than 2%, electrical response |
Audio Processor Functions |
DSP based; Compression 1:1, 1.5:1, or 2:1; High-pass and low-pass filter frequency control |
Auto Carrier Shut-Off |
Adjustable timer shuts off carrier when no audio is present. Adjustable through webpage. |
Infrared Test LED |
Dual IR LED for receiver testing, monitoring, and audio signal testing. |
Audio Input |
(2x) Combination 3-pin XLR, 1/4” (TRS) jack for balanced or unbalanced line level, or balanced or unbalanced microphone with selectable phantom power |
Dante |
Optional |
Internal Test Tone |
400 Hz internal test tone selectable as audio input source for setup and diagnostics |
Remote Configuration |
Available through embedded website |
Headphone Output |
(2) 1/4″ headphone jacks on front panel for monitoring CH A and CH B audio inputs |
Emitter Output Jack |
Four RJ-45 ports for CAT5e cables; provides +48VDC Power, RS-485 communication, and Baseband signals for IR transmission. |
Operating requirements |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty |
2 years on Modulator, 90 days on accessories |
Model: IR E4 Specifications |
Dimensions |
7.5” (W) x 1.4” (H) x 3.6” (D)
(19.1 cm x 3.6 cm x 9.1 cm) |
Weight |
0.8 lb (362 g) |
Color |
Black |
Power |
48 VDC supplied by IR M1 via CAT 5e cable. |
Coverage Area |
Up to 18,000 square feet in single channel mode |
Connectivity |
+48VDC Power, RS-485 communication, and Baseband signals for IR trasmission are all provided via a single CAT5e cable inserted into an RJ-45 jack from the IR M1. |
Operating requirements |
0-50ºC ambient temperature, non-condensing, non-corrosive atmosphere |
Approvals |
CE, FCC, RoHS, RCM, WEEE, CB Scheme, ISED, VCCI |
Warranty |
2 years on Emitter; 90 days on accessories |