• Receiver amplifier with pendant & handheld mic, plug-in & handheld charger

• Amplifier: digital hybrid class D
• Powers 4 x 8 ohm classroom speakers
• EchoGuard prevents remote audio from being looped back into conference audio
• Assistive Listening System (ALS) output with level control on rear panel (3.5mm)
• Fire Alarm Mute Input

The 4th generation Maxim™ is our flagship infrared classroom audio system that comes ready to support both in-person and hybrid learning.

It is the ultimate audio system for group presentation; whether in a classroom, boardroom, or conference area. Its two channel receiver allows the simultaneous use of two wireless infrared microphones. Our Sapphire pendant is ideal for hands free presentation while our IRH-35 handheld can be passed around the room for individual participation.

When connected to overhead speakers, the Maxim™ ensures that crystal clear sound is delivered to every seat in the room.

Four auxiliary line inputs to integrate various media devices to supplement your presentation material for added engagement, plus connections for intercom, fire alarm, and security alert.

An ultrasensitive dome sensor mounted to the ceiling renders 100% reliable signal connectivity of the microphone throughout the room.

With our advanced infrared (IR) engineering, TeachLogic systems are less susceptible to outside interference and all transmission will be contained in the room. IR will not pass through a solid surface, thus eliminating transmission into an adjacent room and providing absolute security. What is said in the room stays in the room.

The Sapphire is our flagship microphone designed specifically for educators. Hands free, lightweight, and hardly noticeable when worn on a lanyard or clipped directly to your neckline collar. It transmits wirelessly to a TeachLogic audio receiver, which can be part of a complete TeachLogic classroom audio system (microphone + amplifier/receiver + speakers) or added to an existing sound system by using our VoiceLink I receiver. Regardless, the Sapphire ensures your students hear equally well.

Performance: The Sapphire’s vocal clarity is unsurpassed. It boasts high level output, reliable connectivity and exceptional definition. With a built-in breath filter, the Sapphire can also function as a pass-around hand mic.

For All Infrared Sound Systems

The handheld microphone/transmitter is primarily used by students for interactive class participation. The ergonomic design renders user comfort and very low handling noise. The unidirectional condenser microphone reproduces excellent vocal quality and the windscreen prevents breath pops. The emitting diodes are located around the top and bottom end of the handle for 360° transmission and assured connectivity throughout the classroom.

The ceiling sensor is the preferred infrared sensor for optimum performance. It comes standard with Forum, Maxim III, Spectrum II, VoiceLink I, VoiceLink Plus, VoiceLink III and VoiceLink IV packages. This unit needs to be installed on the ceiling at least 3′-0″ from the video projector. It comes with a mounting/support bracket and 50 feet of plenum rated cable with RCA connector on each end. The ideal location for the dome sensor would be in the center of the ceiling. This will provide a clear signal path for the IR transmission from the transmitter to the dome sensor without obstruction. In addition, you will have 360° coverage and will minimize the transmission distance for more reliable performance. It collects the infrared transmission signal via 6 large detecting diodes. The sensor is connected to the mixer/amplifier via a plenum rated cable terminated with RCA connectors. The mixer/amplifier supplies the power to the sensor.

Plug-in charger for IRT-55/IRT-60 Sapphire microphones.

• 5.0 V | 1.0 A
• Includes:
• wall plug
• 1 M (3′ 3″) micro USB cord

Drop-in Charger for Handheld (IRH-35 or IRH-40) transmitter

• Convenient drop-in insertion
• Optimum charging rate for NiMH battery