| Model: FRU-SLR40WI-PJR Specifications |
| Description |
FRU LightRaise 40WI Projector |
| Projector Specifications |
| Size |
14" W × 12 5/8" H × 27" D (35.6 cm × 32 cm × 68.6 cm) |
| Weight |
17 lb. (7.7 kg) |
| Shipping size |
20" W × 15 1/2 " H × 24" D (50.8 cm × 39.4 cm × 61 cm) |
| Shipping weight |
35 lb. (15.9 kg) |
| System requirements |
Windows® operating systems or Mac operating system software as detailed in the SMART Notebook™ collaborative learning software for Windows and Mac computers release notes. Your LightRaise projector supports one computer connection on a primary display only. |
| USB connection |
12 Mbps |
| Environmental compliance |
China EIP, EU WEEE, Covered Electronics Devices, Packaging, Batteries and EU RoHS |
| Regulatory certification |
CB (TUV), CCC, CE, C-Tick, FCC, GOST-R, KC, PSB, PSE, TUV-GS, UL (U.S./Canada) and VCCI |
| Warranty |
The projector and interactive pen have a three-year limited equipment warranty. The projector lamp has a 1000-hour/one-year warranty. See warranty documents for details. |
| Projector Features |
| Aspect ratio |
16:10 and 16:9 selectable native aspect ratios with support for 4:5 and 4:3 ratios with scaling |
| Contrast ratio |
2900:1 |
| Minimum interactive area size on a blank wall |
82" (208.3 cm) diagonal
69 1/2" W × 43 1/4" H (176.6 cm × 110.4 cm)
Minimum 20" (50.8 cm) clearance required from top of image area to ceiling |
| Maximum interactive area size on a blank wall |
102" (259.1 cm) diagonal
86 1/2" W × 54" H (219.7 cm × 137.3 cm)
Minimum 22 1/4" (56.5 cm) clearance required from top of image area to ceiling |
| Throw ratio |
0.30:1 |
| Display resolution |
WXGA 1280 × 800
HD ready, maximum resolution 720p pixel perfect, 1080i supported |
| Display technology |
The projection engine usesDLP® technology by Texas Instruments™, providing BrilliantColor™ performance and quality Gamma 2.2 correction with Bright Room, Dark Room, sRGB, User and SMART Presentation modes. |
| 3D technology |
3D-ready projector using DLP Link™ technology |
| Video system compatibility |
NTSC, NTSC 4.43, PAL, PAL-N, PAL-M and SECAM |
| Video interface compatibility |
HDCP compliant HDMI™, Composite, S-video, VESA® RGB with additional interface support for Component YPbPr and Component YCbCr inputs with the proper adapters (not included) |
| Video format compatibility |
The projector has a native 16:10 aspect ratio XGA resolution and supports VGA, SVGA, SXGA, Quad VGA, SXGA+ and UXGA formats with scaling. |
| Synchronization |
Auto image synchronization (auto tracking, frequency, position adjustment, source detect and phase detect) |
| Keystone correction |
Corrects for projector tilt +40º/- 40º |
| Brightness |
Adjustable to compensate for ambient light. Estimated at up to 2500 lumens (typical) at a CCT of 6500 K by the IEC method. |
| Lamp life |
2500 hours in Standard 230 W mode. 4000 hours in Economy 190 W mode |
| Projector noise |
36 dBA at high speed and 31 dBA at standard speed, measured using the JIS method |
| Speakers |
The projector includes a built-in speaker. |
| Frequency range |
100 Hz to 20 kHz |
| Maximum output |
83 dB SPL |
| Output |
10 W peak |
| Controls |
| Remote control |
Provides a method of controlling the projector and adjusting the projector settings |
| External control |
The RS-232 control connector is configured to accept control codes from your computer or from an optional room control system. An RS-232 cable isn’t included. |
| Power requirements |
100V–240V AC at 50 Hz–60 Hz |
| Power consumption |
290 W average in Standard mode and less than 1 W in Standby mode in accordance with EuP regulations |
| Storage temperature |
-4°F to 122°F (-20°C to 50°C) with up to 80% humidity, non-condensing |
| Operational temperature |
At normal fan speed: 41°F to 95°F (5°C to 35°C) with up to 80% humidity, non-condensing from 0' to 6000' (0 m to 1800 m)
At high fan speed: 41°F to 95°F (5°C to 35°C) with up to 80% humidity, non-condensing from 6000' to 6800' (1800 m to 2100 m) |