| Model: AMP-HDTR64BTVC Specifications |
| Description |
Three Source, Integratable, 6" Amplified, In-Ceiling Speakers with Transformer (Four Speaker Package with Bluetooth Volume Control) |
| Speaker Diameter |
6.5 inches |
| Weight of Amplifier/Speaker Assembly |
3.15 pounds |
| Height of Amplifier/Speaker Assembly |
4.5 inches |
| Backcan “Suitable for use in air handling spaces” |
UL Listed Enclosure |
| Tile Bridge “Suitable for use in air handling spaces” |
UL Listed Support Truss |
| Electrical Amplifier |
| Input voltage, nominal |
(25 watts) 15 volts DC |
| Input current, operating (15VDC) |
1.45 amperes peak |
| Input volt-amperes, peak (15VDC) |
22 volt-amperes |
| Input voltage, maximum |
16.5 volts, DC |
| Frequency Response |
| EQ set to flat |
20Hz to 20 kHz |
| Bass |
±10dB@50Hz |
| Treble |
±10dB@10kHz |
| THD + Noise |
<1% at 13.5 watts, “A” weighted |
| S/N |
>82 dB |
| Max Power Output (28V in) |
40 watts |
| DC Power, Standby |
1.4 watts |
| AC Power, Sleep Mode |
1.4 watts |
| DC Power |
| Short Circuit protected |
Yes |
| Over current protected |
Yes |
| Over voltage protected |
Yes |
| Over temperature protected |
Yes |
| Minimum Load Impedance |
4.0 Ω (Two 8 Ω Speakers in parallel) |
| Minimum Input impedance, Priority in |
10,000 Ω |
| Minimum Input impedance, RJ45 in |
150,000 Ω |
| Minimum Input impedance, mini-jack |
37,000 Ω |
| Warranty |
1 year |
| Power Supply |
| Input |
100 to 240 VAC, 50-60 Hz, 1.4A | Note: Be sure to use the correct polarity on the power input. |
| Output |
15 VDC, 3.5 amperes |
| Wire gauge and length |
Minimum 18 gauge up to 40 feet maximum length |
| Electrical, Power Supply |
UL Listed, Level 5 (Energy Star) |
| Weight |
0.45 pounds |
| Size |
4.7”H x 2”W x 1.2”D |
| IC6 Specifications |
| Description |
6.5", 2-way, coaxial |
| Impedance |
8 ohms |
| Sensitivity (1W/1M) |
86dB |
| Dispersion |
120 degrees |
| Max Power (8 Ohms) |
50 watts |
| Nominal Power (8 Ohms) |
25 watts |
| Frequency Response |
65Hz ~ 20 kHz |
| Woofer Size |
6.5" |
| Woofer Material |
Paper, PP coated |
| Tweeter Size |
0.5" |
| Tweeter Material |
PEI |
| Grill Material |
Aluminum |
| Overall Dimensions (Diameter X Height) |
Inches Φ8.93*3.45 |
| Cut Out Size (Diameter) |
Inches Φ7.68 |
| Weight |
2.5 lbs. |
| Mounting Hardware |
Mounting Clamps |