Model: 2X2AMP-HD2S64 Specifications |
Description |
Three Source, 6" Integratable Amplified In Ceiling Speakers on a 2X2 Metal Tile (Four Speaker Package) |
Components |
One (1) each (AMP-HD2SIC6) 6" amplified speaker with (PS15VDC35AL5) 15 volts Level 5 power supply
Four (4) each 2X2 metal tile
Four (4) each Backcan enclosure
Three (3) each IC6 |
Amplified Speaker Specifications |
Speaker Diameter |
6.5 inches |
Weight of Amplifier/Speaker Assembly |
3.15 pounds |
Height of Amplifier/Speaker Assembly |
4.5 inches |
Backcan “Suitable for use in air handling spaces” |
UL Listed Enclosure |
Tile Bridge “Suitable for use in air handling spaces” |
UL Listed Support Truss |
Electrical Amplifier |
Input voltage, nominal (25 watts) |
15 volts DC |
Input current, operating (15VDC) |
1.45 amperes peak |
Input volt-amperes, peak (15VDC) |
22 volt-amperes |
Input voltage, maximum |
16.5 volts, DC |
Input voltage, nominal |
(25 watts) 15 volts DC |
Input current, operating (15VDC) |
1.45 amperes peak |
Input volt-amperes, peak (15VDC) |
22 volt-amperes |
Input voltage, maximum |
16.5 volts, DC |
Frequency Response |
EQ set to flat |
20Hz to 20 kHz |
Bass |
±10dB@50Hz |
Treble |
±10dB@10kHz |
THD + Noise |
<1% at 13.5 watts, “A” weighted |
S/N |
>82 dB |
Max Power Output (28V in) |
40 watts |
DC Power, Standby |
1.4 watts |
AC Power, Sleep Mode |
1.4 watts |
DC Power |
Short Circuit protected |
Yes |
Over current protected |
Yes |
Over voltage protected |
Yes |
Over temperature protected |
Yes |
Minimum Load Impedance |
4.0 Ω (Two 8 Ω Speakers in parallel) |
Minimum Input impedance, Priority in |
10,000 Ω |
Minimum Input impedance, RJ45 in |
150,000 Ω |
Minimum Input impedance, mini-jack |
37,000 Ω |
Warranty |
1 year |
Power Supply Specifications |
Model |
PS15VDC35AL5 |
Input |
100 to 240 VAC, 50-60 Hz, 1.4A | Note: Be sure to use the correct polarity on the power input. |
Output |
15 VDC, 3.5 amperes |
Wire gauge and length |
Minimum 18 gauge up to 40 feet maximum length |
Electrical, Power Supply |
UL Listed, Level 5 (Energy Star) |
Weight |
0.45 pounds |
Size |
4.7”H x 2”W x 1.2”D |
Non-Amplified Speaker Specifications |
Description |
6.5", 2-way, coaxial |
Impedance |
8 ohms |
Sensitivity (1W/1M) |
86dB |
Dispersion |
120 degrees |
Max Power (8 Ohms) |
50 watts |
Nominal Power (8 Ohms) |
25 watts |
Frequency Response |
65Hz ~ 20 kHz |
Woofer Size |
6.5" |
Woofer Material |
Paper, PP coated |
Tweeter Size |
0.5" |
Tweeter Material |
PEI |
Grill Material |
Aluminum |
Overall Dimensions (Diameter X Height) |
Inches Φ8.93*3.45 |
Cut out Size (Diameter) |
Inches Φ7.68 |
Weight |
2.5 lbs. |
Mounting Hardware |
Mounting Clamps |