NEC NP-PA804UL-W-41 Specifications |
Display |
Aspect Ratio |
16X10 |
Native Resolution |
WUXGA 1,920x1,200 |
Maximum Resolution |
4K 4,096 x 2,160 |
Contrast Ratio (typical) |
3,000,000:1 (with Dynamic Contrast) |
Synchronization Range |
Horizontal (Analog/Digital) |
Analog: 15-100kHz, Digital: 15-153kHz |
Vertical (Analog/Digital) |
Analog: 48-120Hz, Digital: 24-120Hz |
Signal Compatibility/Connectivity |
Supported Video Standards |
NTSC, NTSC4.43, PAL, PAL-60, PAL-M, PAL-N, SECAM |
SD/HD Video Signal Compatibility |
480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 4K |
PC Signal Compatibility |
VGA, SVGA, XGA, SXGA, SXGA+, UXGA, WUXGA, Quad HD |
Macintosh Signal Compatibility |
Yes |
Sync Compatibility |
Separate Sync / Composite Sync / Sync on G |
External Control |
RS-232, IR, HDBaseT, DDC/CI, RJ-45, USB (USB 2.0) |
Input Terminals |
RGB1(analog): VGA 15 pin D-sub, Component video using ADP-CV1E adapter
RGB2(digital): HDMI (V2.0) w/ HDCP (V1.4/2.2)
RGB3(digital): HDMI (V2.0) w/ HDCP (V1.4/2.2)
RGB4(digital): DisplayPort w/HDCP (V1.3)
RGB5(digital): HDBaseT w/HDCP (V1.4/2.2)
Audio 1: Stereo Mini Jack |
Output Terminals |
Audio: Stero Mini Jack
Monitor Out: HDBaseT w/ HDCP (V1.4/2.2) |
Power Consumption (typical) |
On |
635W / 515W / 0.8W / 0.22W |
Input Current |
10.5A - 4.6A |
Power Requirements |
100-240V AC, 50/60 Hz |
Power Supply Voltage |
100-240V AC, 50/60 Hz |
Physical Specifications |
Dimensions (WxHxD) |
Product: 23.6 x 8.5 x 19.3 in. / 599 x 216 x 490mm
External: 23.6 x 8.5 x 19.3 in. / 599 x 216 x 490mm
Shipping: 28.9 x 14.1 x 24.8 in. / 735 x 359 x 631 mm |
Weight |
Net: 53.1 lbs. / 24.1kg
Shipping: 63.3 lbs. / 28.7 kg |
Environmental Conditions |
Operating Temperature |
41-104°F / 5-40°C |
Operating Humidity |
20 to 85% Humidity (Non-Condensing) |
Operating Altitude |
0 to 3,650 m (12,000 ft) |
Storage Temperature |
14-122°F / -10-50°C |
Storage Humidity |
20% - 80% (non-condensing) |
Storage Altitude |
0-12,000m / 0-39,370ft (above sea level) |
Limited Warranty (parts & labor) |
Registered owners receive a 5-year or 20,000 hours parts and labor warranty including InstaCare next business day exchange. |
Additional Features |
4K Ready
Motorized Lenses
Manual Keystone Correction
3D Stereo
Geometric Correction
Quick power on
ECO Mode Technology
DiCom Simulation
Edge Blending
Stacking
Virtual Remote
DisplayNote
NaViSet Administrator 2
Quick power-off
Picture-in-Picture
Advanced AccuBlend
AutoSense
ProAssist Software |
Optical |
Light Output (Lumens) |
8,200 Lumens |
Light Source Life |
20,000 hours |
Throw Ratio |
0.8:1 Manual Fixed Lens
1.16 - 1.52:1 Manual Zoom Lens w/ lens shift
1.46 - 2.95:1 Manual Zoom Lens w/ lens shift
2.90 - 4.68:1 Manual Zoom Lens w/ lens shift
4.59 - 7.02:1 Manual Zoom Lens w/ lens shift
0.32:1 Ultra-Short Throw Lens / 0.79 to 1.11:1 Motorized Zoom Lens / 1.30 to 3.02:1 Motorized Zoom Lens / 2.99 to 5.93:1 Motorized Zoom Lens |
Projection Distance |
2.5 to 68.5 ft. / 0.74 to 20.9m |
Projector Angle |
10.3 to 10.8° tele / 13.7 to 14.5° wide |
Lens |
Zoom: Motorized |
Focus: Motorized |
F number, fnumber:
(NP44ML-02LK) F=2.0, f= 6.27mm
(NP11FL) F= 2.3, f= 13.2mm
(NP12ZL) F= 2.2 to 2.69, f= 19.4 to 25.3mm
(NP13ZL) F= 1.7 to 2.37, f= 24.2 to 48.6mm
(NP14ZL) F= 2.2 to 2.64, f= 48.5 to 77.6mm
(NP15ZL) F=2.2 to 2.7, f= 76.6 to 116.5mm
(NP40ZL) F=2.0 to 2.5, f= 13.3 to 18.6mm
(NP41ZL) F=1.7 to 2.0, f= 21.8 to 49.8mm
(NP43ZL) F=2.2 to 2.6, f= 49.7 to 99.8mm |
Keystone Correction |
+/- 40° horizontal, +/- 40° vertical |
Mechanical |
Installation Orientation |
Floor/Front, Floor/Rear, Ceiling/Front, Ceiling/Rear |
Fan Noise |
35 dB normal / 32 dB eco |
Regulations |
USA UL60950-1: 2nd edition, FCC Part15 Subpart B(ANSI C63.4.2014), CAN/CSA C22.2 No.60950-1-07,2nd Edition,2014, ICES-003 Issue6(ANSI C63.4:2014) |
Optional Lenses |
0.8:1 Manual Fixed Lens w/lens shift (NP11FL), 1.16 - 1.52:1 Manual Zoom Lens w/lens shift (NP12ZL), 1.46 - 2.95:1 Manual Zoom Lens w/lens shift (NP13ZL), 2.90 - 4.68:1 Manual Zoom Lens w/lens shift (NP14ZL), 4.59 - 7.02:1 Manual Zoom Lens w/lens shift (NP15ZL), Ultra-Short Throw Lens 0.32:1 (NP44ML-02LK), Motorized Zoom Lens 0.79-1.11:1 (NP40ZL), Motorized Zoom Lens 1.30-3.02:1 (NP41ZL), Motorized Zoom Lens 2.88-5.93:1 (N43ZL) |
Accessories |
Optional |
- Remote Control (RMT-PJ40)
- 0.8:1 Manual Fixed Lens w/lens shift (NP11FL)
- 1.16 1.52:1 Manual Zoom Lens w/lens shift (NP12ZL)
- 1.46 2.95:1 Manual Zoom Lens w/lens shift (NP13ZL)
- 2.90 4.68:1 Manual Zoom Lens w/lens shift (NP14ZL)
- 4.59 7.02:1 Manual Zoom Lens w/lens shift (NP15ZL)
- Ultra-Short Throw Lens 0.32:1 (NP44ML-02LK)
- Motorized Zoom Lens 0.79-1.11 (NP40ZL)
- Motorized Zoom Lens 1.30-3.02 (NP41ZL)
- Motorized Zoom Lens 2.99-5.93 (NP43ZL)
- Option Cover (NP13CV-B)
- Ceiling Mount (NC1100CM)
- Extension Column (AEC006009)
- Extension Column (AEC012018)
- Extension Column (AEC0203)
- Extension Column (AEC0305)
- Power Cord (NP01PW1)
- RGB Signal Cable (RGBCBL-PJPX)
- 3D Glasses (XPAND C105-RF-1)
- RF Emitter (XPAND AD025-RF-X1)
|
Primary Lenses |
0.8:1 Manual Fixed Lens w/lens shift (NP11FL), 1.16 - 1.52:1 Manual Zoom Lens w/lens shift (NP12ZL), 1.46 - 2.95:1 Manual Zoom Lens w/lens shift (NP13ZL), 2.90 - 4.68:1 Manual Zoom Lens w/lens shift (NP14ZL), 4.59 - 7.02:1 Manual Zoom Lens w/lens shift (NP15ZL), Ultra-Short Throw Lens 0.32:1 (NP44ML-02LK), Motorized Zoom Lens 0.79-1.11:1 (NP40ZL), Motorized Zoom Lens 1.30-3.02:1 (NP41ZL), Motorized Zoom Lens 2.88-5.93:1 (N43ZL) |
Lens Adjustment Functions |
Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) / Range of shift is dependent on lens |
Supported Screen Size (maximum) |
40 to 150 in. / 1.02 to 3.8m, NP11FL; 30 to 500 in. / 0.76 to 12.7m, NP12ZL; 40 to 500 in. / 1.02 to 12.7m, NP13ZL; 50 to 500 in. / 1.27 to 12.7m, , NP40ZL, NP41ZL, NP43ZL; 60 to 500 in. / 1.52 to 12.7m, NP14ZL, NP15ZL; 100 to 400 in. / 2.54 to 10.16m, NP44ML-02LK |
DMD Specifications |
0.76" LCD w/ MLA |
Notes |
*** Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8.
***** When the AC power to the projector power supply and the lamp power supply are provided by a single cable. |