FSR PWB-450-BLK Wall Box

Wall Box

• Simple installation
• 4 integrated AC outlets are pre-wired
• Internal brackets can be removed to accommodate mounting larger devices

Cover is ventilated top and bottom to provide convection cooling

The PWB-450-BLK mounts in a typical 4" deep wall between the studs in a standard 16" stud bay. It provides connectivity, internal device mounting, and power in a secure and invisible manner. The cover is flush to the wall allowing the display to be mounted as close as its mount will allow. The cover is ventilated top and bottom to provide convection cooling as well as a cable exit slot to pass cables from the box to the display.

Inside the PWB-450-BLK are four (4) pre-wired AC outlets along one vertical side of the box which are isolated from the four (4) accessory plate mounting brackets to allow AC and low voltage connections within the same box. There is a ½" – ¾" concentric KO on the top and bottom of the box for the AC conduit connections. 1" KO’s in the divider plates allow the use of one or more accessory plates for AC connections.

Provide space to mount larger devices

Three of the accessory plate brackets are punched for a single gang Decora opening while the fourth bracket is punched for FSR’s IPS Connector Plates. Behind each bracket is a ¾" and a 1"–1 ½" concentric KO providing ample wiring flexibility and easy installation. Any or all of the accessory plate mounting brackets can be removed to provide space to mount larger devices. When using the optional PWB-450-DM4k bracket for the Crestron DM-RMC-4K-SCALER-C two (2) of the accessory plate brackets will be removed from the box.

Applications:

• Digital signage
• Huddle areas
• Hospitals
• Conference centers
• Schools
• Airports
• Command centers
• Electronic billboards
• Museums
• Arenas