FSR PWB-250 Cover Project Wall Boxes Cover
PWB-250 Series Wall Box
The PWB-250 series is the largest and highest capacity model of the PWB-200 series of wall boxes. This unit is approximately 14.25" x 7"x 4" and has three single gang knockouts and one IPS knockout to mount up to six single IPS plates. In addition, a removable pass-through enclosure provides an additional single gang knockout and can be used to isolate cables that the installer may need to pass through the back box.
The PWB-250 cover is available in white or black and is suitable for painting or other finishing, matching any décor. The two-part cover is vented to provide convection cooling for the internal components. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside the box making the entire installation as clean as possible.
The PWB-250 comes with all the necessary hardware to make installing a breeze. Each wall box comes with mounting screws in either black or white, back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.
FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheet rock or plywood in existing construction.