PWB-200 Series Wall Box

The PWB-200 series balances quality and cost, bringing fully featured wall boxes to you at an affordable price. FSR has kept the cost low while delivering the quality and ease of installation you have always experienced with FSR products.

All models are ready to install and include a two-part cover with mounting screws in either black or white, a back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.

The PWB is available in white or black and is suitable for painting or other finishing, matching any décor. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside the box making the entire installation as clean as possible. The cover screws onto the front of the box once all connections are in place.

FSR designed this unit for new and existing construction.

• Rugged 14 gauge steel back box with 1/16" front cover
• Compatible with FSR’s IPS inserts
• Can be installed in new or old work
• AC and low voltage back box included
• Connectors are hidden behind an attractive cover
• Multiple knockouts in a variety of sizes
• UL listed AC back box provided

The PWB-250 series is the largest and highest capacity model of the PWB-200 series of wall boxes. This unit is approximately 14.25" x 7"x 4" and has three single gang knockouts and one IPS knockout to mount up to six single IPS plates. In addition, a removable pass-through enclosure provides an additional single gang knockout and can be used to isolate cables that the installer may need to pass through the back box.

The PWB-250 cover is available in white or black and is suitable for painting or other finishing, matching any décor. The two-part cover is vented to provide convection cooling for the internal components. It has a cable exit slot for the display connections and the excess cable can easily be hidden inside the box making the entire installation as clean as possible.

The PWB-250 comes with all the necessary hardware to make installing a breeze. Each wall box comes with mounting screws in either black or white, a back box, screws for wood or steel stud mounting, grounding screws, tie wraps, and a rubber grommet.

FSR designed this unit for new and existing construction. Brackets are included for mounting to studs in new construction as well as surface mount clips for mounting to sheetrock or plywood in existing construction.