| Model: Pro L12000QNL Specifications |
| Description |
Native 4K 3LCD Laser Projector Without Lens |
| Projection System |
High-aperture Epson® 3LCD, 3-chip technology |
| Projection Method |
Front/rear/ceiling mount |
| Driving Method |
Poly-silicon TFT Active Matrix |
| Native Resolution |
(3840 x 2160) 4K UHD |
| Resolution on Screen |
4K UHD |
| Pixel Number in Device |
8,294,400 pixels (3840 x 2160) x 3 chips |
| Signal Input |
Maximum Display Resolution: 4096 x 2160 (resizing display) |
| Display Resolution: 3840 x 2160 pixels |
| Color Brightness - Color Light Output |
Color Light Output: 12,000 lumens1 |
| White Brightness - White Light Output |
White Light Output: 12,000 lumens1 |
| Aspect Ratio |
16:9, 4:3 |
| Brightness Uniformity |
90% |
| Pixel Arrangement |
Cross stripe |
| Contrast Ratio |
2,500,000:1 |
| Color Reproduction |
Up to 1.07 billion colors |
| Light Source Life |
20,000 hours (Normal); 30,000 hours (Extended)2 |
| Illumination Technology |
Laser Diode |
| General |
| Operating Temperature |
32 ˚ to 122 ˚ F (0 ˚ to 50 ˚ C) |
| Weight |
113.3 lb (without standard lens, not included) |
| Security |
Security cable hole, Kensington lock provision |
| Projection Lens |
| Type |
Powered shift/focus/zoom (ELPLM15 Lens) |
| F-number |
1.8 – 2.35 (ELPLM15 Lens) |
| Focal Length |
36.0 – 57.4 mm (ELPLM15 Lens) |
| Zoom Ratio |
Optical zoom 1 – 1.6x (ELPLM15 Lens) |
| Throw Ratio Range |
1.57 – 2.47 (ELPLM15 Lens) |
| Lens Shift |
Vertical: ±58 percent; horizontal: ±16 percent (ELPLM15 Lens) |
| Projector Details |
| Input Signal |
Input Video Signal (HDMI®, DVI-D, HDBaseT and DisplayPort) 480i/480p/576i/576p/720p/1080i/1080p/3840 x 2160/4096 x 2160 |
| Interfaces |
HDBaseT x 1
VGA x 1 |
| Interface (Slot 1) |
ELPIF01 (included from factory)
DVI-D x 1
HDMI® x 1 (HDCP2.2)
DC Out (500 mA) |
| Interface (Slot 2) |
ELPIF01 (included from factory)
SD/HD/3G/12G-SDI x 4
SDI - Active Through x 4 |
| Interface Card (optional) |
ELPIF03
Display port x 2 (DP 20p) |
| Other |
USB connector Type B x 1: for firmware update, Copy OSD Settings
USB connector Type A x 1: for firmware update, Copy OSD Settings, DC Out 900 mA
Monitor out: Mini D-sub 15-pin x 1
Serial: RS-232c x 1
Remote: Stereo mini
Wire LAN x 1 etherCON |
| Fan Noise |
45 dB (Normal Mode); max. 38 dB (Quiet Mode) |
| Power |
| Power Supply Voltage |
100 - 120 V AC, 200 - 240 V AC +/- 10%, 50/60 Hz
Requires 200-240 V for full spec. operation |
| Power Consumption |
1741 W (Normal Mode)
1030 W (Extended Mode)
2.0 W Standby (Communication on)
0.5 W Standby (Communication off) |
| Projector Dimensions |
| Including feet |
24.4" x 14.1" x 31.1" (620 x 358.5 x 790 mm) |
| Remote Control |
| Features |
Power, Search Selection, Lens Shift, Zoom, Focus, Test Pattern Selection, Shutter, Freeze, User ID, Auto, Aspect, Color Mode, Menu, Slot 1, Slot 2 and more |
| Operating Distance |
49 ft |
| Operating Angle |
Right/Left: Front: ± 50 degrees; Rear: ± 40 degrees
Upper/Lower: Front: ± 50 degrees; Rear: +30 degrees |